资源列表
ICdesign
- IC卡设计方面的源代码,非常有参考价值,主要用Keil C和89C51-IC card design source code, very useful
VHDL
- 能够产生方波、三角波、正弦波、及阶梯波，并且可以通过选择开关选择相应的频率输出和波形输出；通过按键确定输出的波形及确定是否输出波形.-Able to generate square wave, triangle wave, sine wave, and wave ladder, and can select the appropriate choice of switching frequency output and the waveform output through the keys
lcd_1602
- 1602 LCD控制的verilog代码，学习的好东西-1602 LCD control Verilog code, learning good things
seg7led
- 一个verilog写的控制LED的FPGA的代码。-Write a Verilog control LED of the FPGA code.
RF
- 接收前面的雷达信息，平时没有测速信号时，雷达会定时发射一个连接信号，以检测RF是否连接正常。当遇到测速信号时，雷达会发射特定的代码。-Receiver in front of the radar information, granted that there is no gun signal, the radar will regularly launch a connection signal to detect whether or not to connect the normal RF.
ASCii_code
- 用于获取字符和汉字的ASCII码值,用于液晶屏开发非常有用-For access to characters and characters of the ASCII code value for the LCD screen is very useful to develop
Ink
- Program control of the incubator.
LPC-2114-Spi
- 开发环境为ADS1.2,LPC2114带UCOSII的SPI程序-Development environment for ADS1.2, LPC2114 with the SPI procedures UCOSII
1
- 输入一个电流值 按键“确定”在输出端就会有一个大小相当的实际电流输出-sdhsd
AVRreadEEPROM
- 利用GCCAVR读写EEPROM源代码，经过本人在开发板上测试过，绝对能用。-EEPROM read and write using GCCAVR source code, after I tested in the development of on-board absolutely can.
SPI
- 基于LPC2131芯片做的SPI主机实验，利用7段数码管显示。-Based on the LPC2131 chip SPI host to do the experiments, the use of 7 digital tube display.
zlg7290
- ZLG7290 使用简例子, 可供参考.-Jane ZLG7290 the use of examples for reference.