资源列表
RS232_PS2_Control
- Verilog语言编写的RS232控制模块以及RS232到PS2的通信接口模块。整个模块已经通过Virtex4的FPGA平台上的硬件仿真和验证。-Verilog HDL model for RS232 and PS2 interface communication control block. It includes the RS232 RX-TX model as well as PS2 model, and it have already been proven in FPGA virtex
STC11FxxIR_RS232_CLOCK
- 51单片机C语言RS232串口\内部时钟读取\红外接收应用-51 microcontroller serial clock infrared receiver applications
STC12LE5A08S2
- 这是对于基于STC12LE5A08S2芯片的程序，UART口驱动，WS25Q读取，12*12点阵显示代码-This program based on STC12LE5A08S2 chip UART port driver, WS25Q the read, 12* 12 dot matrix display code
RZ-SL20-PCF8591-ADC-test
- 在锐志电子开饭班上利用PCF8591 ADC实验模块实现四通道的模拟电压测量，并用1602芯片显示-PCF8591 ADC the Reiz dinner class experiment module implements four-channel analog voltage measurement and display with 1602 chips
DS18B20-temperature-alarm
- 实时采集当前环境温度值，并显示于数码管上。 同时，当温度高于某一值时（此处设为31摄氏度），蜂鸣器便会发出报警。 而当低于该值时，蜂鸣器自动停止报警。试验时，可用手触摸DS18B20，使其温度升高到31度，观察现象。-Real-time acquisition current environmental temperature, and display in the digital tube. At the same time, when the temperature is higher th
dianzhen0dao9
- 介绍了点阵0到9循环变化的显示,介绍了单片机的中断使用-Introduced the lattice 0 to 9 cyclic changes in the show, introduced the use of SCM interrupt
18b20
- 18b20温度采集模块，源码程序！此模块精度在0.0625，完全满足工业和生活产品的开发！-18b20 temperature acquisition module, source programs! This module accuracy 0.0625, fully meet the development of industrial and domestic products!
4cube
- 4X4X4 光立方程序 4X4X4 光立方完全制作方法-4X4X4 Light Cube program 4X4X4 light cube full production methods
Analog-Read-Serial
- AD转换,可用来更好的研究嵌入式系统，为做一些proteus仿真提供好的方法-use very good,it s very perfact
EIB-TP-UART-IC
- 西门子智能家居KNX接口模块，KNX 通过建立调度程序,解决KNX实时性传输-Siemens smart home the KNX interface modules, KNX through the establishment of the scheduler, to solve the real-time transmission of KNX
avr-code-c
- AVR STUDIO详细指导说明。有助于初学者及参考使用。-AVR STUDIO detailed instructions. Help beginners use and reference.
dianji
- 步进电机的程序。用步进电机控制舵机的转动-The procedures of the stepper motor. The stepper motor controls the rotation of the steering gear