资源列表
wenshidukzhi
- 温湿度控制，可以实现温度和湿度的测量以及用12864显示，包括程序代码和原理图-Temperature and humidity control can be achieved and the measurement of temperature and humidity display with 12864, including program code and schematic
STM32_PWM_1
- About STM32 PWM1 generation
main
- CC2430基础实验——系统睡眠中断与外部中断-CC2430 basic experiment- the system interrupt and external interrupt sleep
ADC16
- MSP430F425单片机ADC部分程序库-MSP430F425 microcontroller ADC part of the library
nichelite_lpc2378_iar_ewarm5xx
- The NicheLite for LPC product is targeted for the IAR LPC-2378-SK/LPC-P2378-SK Evaluation Board depend of slected confiquration IAR-LPC2-378-SK Debug/IAR-LPC-P2378-SK Debug, using the IAR EW for ARM toolchain and on board J-link interface. e
EXAMPLE2.1
- PIC16887A单片机通过TMR1来实现每500ms端口PORTB高4位的翻转-PIC16887A microcontroller to achieve through the TMR1 port every 500ms high 4-bit flip PORTB
EXAMPLE3.1
- PIC16887A单片机利用RB0/INT中断，每按一次键S1，LED翻转亮-PIC16887A microcontroller using RB0/INT interrupt each time the key S1, LED turn light
EXAMPLE4.1
- PIC16887A单片机利用RB0/INT中断，每按一次键S1，LED翻转亮-PIC16887A microcontroller using RB0/INT interrupt each time the key S1, LED turn light
EXAMPLE4.2
- PIC16887A单片机以TMR0作为计时器，通过RB0输出脉冲，每隔10ms让LED闪亮，采用中断方式-PIC16887A microcontroller to TMR0 as a timer, by RB0 output pulse, so that LED flashes once every 10ms, using interrupt
EXAMPLE4.3
- PIC16887A单片机RA4接一个按键，要求每按一下按键S1，必须进入中断，在中断中让LED闪亮。即使用时钟中断来实现不带中断的按键实现中断。-PIC16887A SCM RA4 by one button, click the button for each requirement S1, must enter an interrupt, the interrupt enable LED flashes. That the use of clock interrupts to impleme
EXAMPLE4.4
- PIC16887A单片机以TMR1作为计时器，通过RB0输出脉冲每隔100ms-PIC16887A TMR1 as the microcontroller timer output pulse every 100ms by RB0
EXAMPLE4.7
- PIC16887A单片机CCP捕捉功能的使用-PIC16887A CCP capture the use of SCM