资源列表
Digital-tube-display
- 数码管动态显示，可以修改时间，51单片机测试程序，希望对你有帮助-Digital dynamic display, you can modify the time, 51 test program, I hope to help you
LMS
- 一个针对单片机的网络通信程序，有经过裁剪的tcp/ip源代码，硬件平台由MSP430f149和CS8900构成，实现采集温度传感器的温度，以web形式显示在上位机上，应用软件是IAR Embedded Workbench Evaluation for MSP430 V4-One for single-chip network communication procedures, has been cutting the tcp/ip source code, hardware platforms
1258
- glcd sample program-glcd sample program
TLC549(LCD)
- AD芯片TLC549的使用，通过单片机89C52实现TLC549的模数转换，并显示在液晶显示屏1602上-the use of TLC549 by using micorchip 89c52
04-huayangdeng
- 这是一个单片机简易控制学习程序，主要控制单片机让发管二极管进行花样显示-This is a simple control MCU learning process, the main microcontroller to control the pattern hair tube diode display
ArduCam_Library-master-(1)
- ucam library.................... with ardino uno
zhinengche
- 基于proteus的智能循迹小车模型搭建-The intelligent tracking car model based on proteus
DDS
- 基于DDS的波形发生器！以下为其头文件代码！ #include <AT89X51.H> #include"lcd.h" uchar code table1[]={"FREQ:"} uchar code table2[]={"WAVE "} uchar code table3[]={"Hz"} uchar code table4[]={"fang bo"} uchar code table5[]={"zhengxianbo"} uchar co
1.5-key-bell
- 飞凌FL2440开发板裸机ADS实验工程文件，可以直接用RVDS打开使用，包含所有源代码和工程项目。这个是按键蜂鸣器实验。-Feiling FL2440 development board bare metal ADS experimental project file, you can directly open with RVDS, contains all the source code and projects. This is the keybell experiment.
AD-temperature
- zigbee片内温度测量程序，通过CC2430内置的温度传感器测量温度，经串口上传至PC并显示出来。-zigbee chip temperature measurement procedures, through the built-in temperature sensor CC2430 temperature, upload to PC via serial port and displayed.
ad
- AVR单片机的AD转换程序，还有仿真的电路图-The AVR MCU AD progrem
DHT11
- DHT11传感器C51源码 lcd1602显示屏显示 Kiel环境编译 仅供大家参考