资源列表
MobyPalm-source-1.01
- OBD软件给Palm平台系统所使用范例程式. -OBD Software for Palm with the MobyDic Interface.
msp430-nixietube
- 用DS18B20测量室温并在数码管上显示。-And displayed on the digital pipe with DS18B20 temperature measurement.
CC2530PSHT10
- CC2430实现SHT10温湿度传感器的采集，并通过串口显示出来。-failed to translate
Key_pad
- EMBEDDED C CODE FOR KEYPAD FOR 8051
1
- 音频优先控制，两个音频信号，其中一个可以打断另一个。-Priority control of audio, two audio signals, one can interrupt another.
droop1
- 下垂控制程序，实现了有功功率和频率之间的下垂特性，亲测通过仿真，中间的有功功率和无功功率可以通过修改负载的实现改变，和大家分享了-Droop control procedures, the active power and frequency droop between the pro-test simulation, in the middle of active and reactive power can bring about change by modifying the load,
T6963
- IAR下AVR的LCD显示程序示例，LCD型号是T6963-IAR under AVR LCD display program example, the LCD model is T6963
vi
- 移植vi到rtems,添加一条shell命令，入口为主函数即可-port vi on rtems
KVM-SmBus
- KVM 充电管理（smbus）及显示控制程序-the soft of KVM charging（smbus） and display
1-Blink
- 学习tinyOS下用nesC开发的入门级应用，用于点亮无线传感器网络节点的LED-This is first study case for TinyOS and nesC
uart
- 串行发送例子程序,已编译通过，可以直接烧录-Examples of serial transmission program
protues-lcd1602
- 基于51单片机的lcd1602的protues仿真和程序-51 SCM lcd1602 based simulation and application of protues