资源列表
ALIENTEK-MINISTM32
- 按键中断，实现不同的时钟配置及转换，并以LED灯的闪烁进行体现，并通过串口发送按键按下信息时钟配置以及LED灯的闪烁状态，尽可能多的实现不同时钟的切换。-Key interrupt achieve different clock configuration and conversion, and blinking LED lights were reflected, and press the clock configuration information and blinking LED li
44b0bootloader
- 针对44B0的bootload，在UP－NETARM3000上调试成功，希望对大家有帮助！-44B0 against the bootload. the UP-NETARM3000 on debugging successful, we want to help!
TchScr
- ARM触摸屏测试,基于S3C2410 ARM系统，Code Worrier测试-ARM touch-screen test, S3C2410 ARM-based system, Code Worrier test
Graphical-LCD-interface-with-8051-C-code
- C code for interfacing Graphical LCD with 8051 microcontroller.
interrupttimer
- Here you can find timer with interrupt for ATMega128 microcontroller.
98632
- GAL设计的累加器，译码器的原代码。已经测试成功，并且生成可烧写的JED文件！-GAL design accumulator, the decoder the original code. Has been tested successfully, and can generate the JED document burning!
xpt2046-control
- xpt2046 触摸控制器代码，利用SPI还可以实现SD卡数据的读取。-xpt2046 touch controller code, the use of SPI can also read SD card data.
3phmeter
- freescale单片机MCF51EM256 驱动3相电机芯片 源代码-MCF51EM256 freescale mcu drive three-phase motor Source Code
proteusandC
- 这是一个用keil C做的动态扫描7段LED数码管程序,是用proteus做的仿真.适合初学者学习使用.
NandFlash
- 在2410上，开发的Ｎandflash驱动程序，以及对NANDFLASH的坏快管理-In 2410, the development of Nandflash driver, and the rapid management of bad NANDFLASH
POWER
- 应用于嵌入式CPU的双路DC-DC设计参考-double dc-dc convetor schematic design
PC-and-MCU-serial-communication
- 以单片机为基础的数据采集和适时控制系统中，通过PC机的RS232-The microcontroller-based data acquisition and control system in due course, through the PC-RS232