资源列表
SensorCollector
- zigbee,实现温湿度传感器数据的采集，并且可以通过串口在PC机上查看相应的数据(ZigBee, the temperature and humidity sensor data acquisition, and can be through the serial port to view the corresponding data on the PC machine)
4.3
- 通过74HC573实现单片机控制数码管的亮灭循环滚动播放。这个功能主要是想拓展AVR单片的I/O引脚，使单片机的引脚可以实现更多功能(Realize single-chip control digital tube through 74HC573)
hid_kb
- Example firmware that emulates a HID-class keyboard using the buttons and seven-segment display on the DVK board.
Exp4_1
- ucos arm 编程 通过 ARM的 rPDATC（低四位）和rPDATE（4~7 位）扩展4×4的键盘，编 的驱动，通过按键可以在超级终端上和液晶屏上显示相应的键值（不带操作系统 求在超级终端上显示） 。 -ucos arm programming through the ARM s rPDATC (low 4) and rPDATE (4 ~ 7-bit) expansion of 4 × 4 keyboard, the driver made by keys in Hyper
Interrupts
- ADI公司 的ADuc7026 示例程序，开发环境是keil for arm-ADI' s ADuc7026 sample program, the development environment is keil for arm
ReticleTEST.rar
- 自制单片机东东\网线测试 测试网线的通断。 ,Self-made single-chip Dongdong \ test test cable network off-line.
phxc
- 应用倾角传感器进行智能小车的平衡，应用51单片机可以实现-Application inclination sensor smart car balance 51 microcontroller can be achieved
4
- IRQ中断处理实验 本实验得到的结果为，系统运行起来后，按12345678任意键，相应的八段数码管就会点亮。 在flash调试时，需要修改RO BASE为0x00000000，其他不用修改，重新编译下载就可运行。 注意：由于系统产生中断，程序计数器就会跳到0x18处执行中断服务子程序，所以不能在SDRAM调试。-IRQ interrupt handling experimental results of this experiment, the system is runnin
Led_control
- 基于AT89c52单片机的LED等控制程序代码，包括读写操作，转换操作等-LED-based AT89c52 MCU control procedures such as code, including read and write operations, conversion, etc.
xiaoche
- 通过定时器0来定时显示时间，用按钮来模拟外来脉冲计算小车行驶路程。以及图标的识别-Show time and distance traveled and the car. As well as the icon of the identification
USB-Blaster
- Altera USB_Blaster下载线制作资料,USB Blaster原理图附程序-Blaster USB schematic diagram
NRF24l01-wireless-24l01
- NRF24l01无线232评分系统；基于51单片机，无线通信芯片NRF24L01串行通信，保证可用。-232 NRF24l01 wireless rar based on 51 single-chip, wireless communication the chip NRF24L01 serial communication, to ensure available.