资源列表
JN-AN-1026-ZigBee-Wireless-Keyboard
- 该代码为Jennic公司芯片JN5121，基于Zigbee协议栈的无线键盘（类似与蓝牙但是成本比蓝牙低许多）的下位机源代码。望跟大家分享！-The code for Jennic JN5121 chip companies, Zigbee protocol stack based on the wireless keyboard (similar to Bluetooth, but with the cost much lower than Bluetooth) The next crew so
Glcd-devices
- Glcd驱动，验证成功才上传的，使用时根据引脚稍稍修改一下，如不想修改按程序内定义的连接即可。stm32f103vbt6-Glcd drive, the validation is successful only upload when used in accordance with the pin slightly modify it, such as do not want to modify the connection can be defined according to intern
USBinterface
- USB接口的原理与使用单片机与电子制作 USB接口的原理与使用单片机与电子制作-The principle and the use of USB interface, SCM and e-USB interface, making the principles and use of SCM and e-production
ADC-ARM-Proteus
- ADC数模转换 基于Proteus仿真 请用最新版本的PROTEUS打开 主芯片采用LPC2124 代码用KEIL写的 都在里面呢。-ADC DAC simulation-based Proteus PROTEUS please use the latest version of the code to open the main chip used by LPC2124 KEIL are written inside it.
fuel_cell_2011year_suss
- this is RS485 system using atmega128 mpu and using max 485 chip and 4port 12v power
burn_flash
- s3c2410的nandflash下载程序，在ADS环境下使用-s3c2410 the nandflash download procedures, the use of ADS environment
St7565-Atmel
- ST7565 driver with ATmega
TLC5615_DA--final
- TLC5615--DA芯片在单片机上实现4种波形，幅度频率可调节。-TLC5615- DA chip microcontroller the four kinds waveform amplitude frequency can be adjusted.
20060820
- 发动机控制，ECU信号编程处理！ 曲轴转动信号与喷油时间长度控制信号-engine control signal ECU Programming! Crankshaft rotation signal and the length of time injector control signal
AT24C64
- PS2键盘与ARM7单片机来连接驱动程序-PS2 Keyboard and ARM7 MCU to connect the driver
sensorReceive
- 无线传感器接收代码，显示屏显示，按键控制，一个小型的嵌入式系-Wireless sensor to receive the code, display shows, button control, a small embedded system