资源列表
DS18b20_2
- thermometer using dallas ds18b20
chuankou
- 这是51单片机串口通信的源代码用c语言写的-This is the source code using c language 51 microcontroller serial communication written
JTAGICE_MKII_clon_Dirk_Braun
- jtag ice mk2 ALL files in one attachment
hdlc
- hdlc协议的封装与解析，fsc校验，完整的例程代码-Decode and Encode an HDLC packet ，using FCS16 calculation
Leds
- LED PROGAM IN BASCOM
Boot-from-the-start(mega64)
- 工作芯片为mega64，GPIOD(6)上接一个继电器，程序上电后将PORTD(6)置1，延时1.5S后关闭继电器。将继电器接到主机的启动引脚上，即可实现开机自启动。PS，适合那些老主板，没有开机自启功能的主板。-Work chip mega64, then a relay GPIOD (6) on the program after power PORTD (6) is set to 1, after a delay 1.5S closed relay. The relay started o
pcd
- Advanced library for arduino PCD8544 display
gpio-test
- 1、将makefile中的 CROSS =/usr/local/arm/2.95.3/bin/arm-linux- CFLAGS+=-I/usr/local/src/2.4.18-rmk7/include CFLAGS+=-I/usr/local/src/2.4.18-rmk7/include/linux CFLAGS+=-I/usr/local/arm/2.95.3/arm-linux/include 路径改为你宿主机上的。 2、#make，来编译驱动模块。 3、
gpio-test
- gpiotest 嵌入式系统下按键驱动源代码-gpiotest embedded system key driver source code
i2c_slave_ref.tar
- stm32f103 descr iption sample program about i2c slave driver
0xfd---00
- keilc51 0xfd 补丁验证程序 SCAN.C(338): warning C280: UpLoadReady : unreferenced label-keilc51 0xfd patch certification procedures SCAN.C (338) : warning C280 type : UpLoadReady : unreferenced label