资源列表
signal-generation
- 多功能函数信号发生器（声音输出，信号保存）-Multi-function signal generator (sound output signal preservation)
RISC8
- 已经测试过的RISC8的verilog源码和说明还包括编译环境和测试程序等
usb-servo_061028.tar_01
- a servo controller using an atmel chip and the v-usb library.
pic18f452chengxu
- pic18f452的几个实验代码，包含液晶显示，定时器中断，pwm，还有iic通讯等。-pic18f452 code of several experiments, including liquid crystal display, the timer interrupt, pwm, there iic communications.
RTC(DS1302)
- RTC实时时钟(DS1302) 实时时钟C程序-RTC (DS1302)
SCI
- 串口通讯程序，基于飞思卡尔单片机的串口通讯程序-Serial communication program, based on Freescale MCU serial communication program
CAN_RX_withTime0622
- 本程序可以通过CAN采集数据，是基于STM32,采用IAR进行编程-The program can collect data by CAN is based STM32, using IAR programming
TFT_FSMC
- STM32F103ZET6 用硬件FSMC驱动TFT 驱动IC：ILI9341-STM32F103ZET6 hardware FSMC driver TFT driver IC: ILI9341
STM32RealTimeClockRTC
- 演示通过串口1显示RTC实时时钟的相关功能-Demonstration through the serial port 1 shows the correlation function of real-time clock RTC
tmp75
- 温度传感器芯片TMP75英文资料 双腿集成电路温度传感器AD590K在电路中只需接直流电源正负极就可以了，电压范围为4V~30V。AD590K是远距离测量，且测量范围为低于150度，为电流输出型集成温度传感器。测量精度为±0.1度；AD590K的输出电流与绝对温度成正比（比例系数即灵敏度为1μA/K）-TMP75 另:双腿集成电路温度传感器AD590K在电路中只需接直流电源正负极就可以了，电压范围为4V~30V。AD590K是远距离测量，且测量范围为低于150度，为电流输出型集成温度传感
RS232-CAN_PIC_adapter
- RS-232 <--> CAN adapter hardware and firmware
gtm900b-dtu(GTM900C)
- gtm900实现程序源码，支持GTM900B及gtm900c-the program source gtm900 support GTM900B and gtm900c