资源列表
wenkong
- 基于DS18B20的51单片机的温度报警程序，-51 DS18B20 microcontroller based temperature alarm program,
SD-for-lpc210x
- lpc210x 中对sd卡的基本操作程序 、初始化读写SD卡的硬件条件（spi接口和其他有用的管腿，如写保护）-lpc210x sd card in the basic operation of the program, read and write SD card hardware initialization conditions (spi interface and other useful tube legs, such as write-protected)
RTC-for-lpc210x
- LPC210X自带有的实时时钟模块，常用的实时时钟芯片有DS1302、DS12C887。要想使用LPC210X的实时时钟只需设定几个寄存器即可，如果想要它具有掉电不丢失数据功能则需要给它添加备用电池-LPC210X comes with some real-time clock module, commonly used real-time clock chip DS1302, DS12C887. To use LPC210X real-time clock can only set a few
PWM-for-lpc210x
- lpc210x系列arm7 中pwm函数功能：MAT3.0输出PWM波形,由于LPC2103没有单独的PWM通道，跟匹配通道复用,调试：改变占空比。用示波器测量-lpc210x series arm7 in pwm Function: MAT3.0 output PWM waveform, the LPC2103 is no separate PWM channels, with the matching channel reuse, debug: changing the duty cycle
lpc210x-fo-AT24C02
- 在 lpc210x系列ARM7中给24C02里写入4个字节，在串口上打印出来；然后读出来，也在串口上打印出来， 显示完后比较，如果不相等，蜂鸣器鸣叫；如果相等，LED闪烁-ARM7 series in lpc210x in to write 4 bytes in the 24C02, printed on the serial port then read out the serial port is also printed on the display after more, if not
LCD12864
- LCD12864 驱动 ,采用串行方式 -LCD12864 drive, using serial
elevator
- 基于嵌入式s3cev40实现电梯控制设置，对于初学嵌入式的朋友帮助很大-Elevator control based on embedded s3cev40 achieve set for friends to help a great beginner embedded
USB_Test
- 基于嵌入式s3cev40的usb设置，对于初学嵌入式的朋友帮助很大-Based on embedded s3cev40 the usb setting for friends to help a great beginner embedded
uCOS-II
- 基于嵌入式s3cev40的ucos显示设置，对于初学嵌入式的朋友帮助很大-Based on embedded s3cev40 of ucos display settings for beginners friends to help a large embedded
Color_lcd_test
- 基于嵌入式s3cev40的液晶屏显示设置，对于初学嵌入式的朋友帮助很大-Based on the LCD display embedded s3cev40 set for friends to help a great beginner embedded
RTC_Test
- 基于嵌入式（s3cev40）rtc设置，对于初学嵌入式的朋友有很大帮助-Based on embedded (s3cev40) rtc set
mega16-5110lcd-spi
- mega16对nokia5110lcd的驱动程序-mega16 driver of nokia5110lcd