资源列表
7.14
- 飞思卡尔摄像头组华东赛区2.5米最终程序-Freescale camera group East Division 2.5 meters final program
887
- 基于stc89c52单片机和12C887时钟芯片，1602液晶的万年历程序-Based stc89c52 clock chip microcontroller and 12C887, 1602 calendar program
code
- 基于ARDUINO平台将超声波采集的模拟信号转换成数字信息，然后利用串口通讯将数据（8位二进制）传送至PC端，利用相应的程序进行处理即可，本程序经调试已成功使用。-Arduino based development platform, analog data acquisition ultrasonic sensor converts the digital signal, and then sends the data through the serial port to the Pc sec
RC522for90C51
- 用于单片机90系列控制RC522的源程序.采用C与语言开发。编译之后程序较为经典. 上位机通过RS232端口，可实现：寻卡,防冲撞,选定卡片,验证卡片密码,读取M1卡一块数据,读取M1卡一块数据。-Used for 90X5X serious development at C,content with RS232,delay for some one who can read M1 card.
Task_OS-AVR
- Task_OS AVR,AVR下的一个简单调试器-Task_OS AVR, AVR with a simple debugger under
Visual-C-serial-communication
- 书籍的名字为 Visual C串口通信技术与工程实践-Visual C serial communication technology and engineering practice
cc1100x
- MSP430F2132驱动CC1100无线模块，收发程序都有，主机发送开启或者关闭命令到从机，然后从机通过匹配得出结果去控制继电器，另外通过串口将接收到的命令发送至PC机以便用户查看。亲测整个程序能够运行-MSP430F2132 CC1100 wireless driver module, transceiver procedures are, the host sends a command to turn on or off from the machine, and then from m
GPIO-control
- ARM GPIO控制,用于控制ARM的GPIO的输入输出-ARM GPIO control
saber_inverter
- 关于使用saber软件的逆变器仿真，可以更精确的达到仿真结果。-saber inverter
RTlab_instruction
- rt-lab半实物仿真平台操作说明，帮助simulink仿真模型快速转化为半实物硬件在环仿真。-rt-lab-loop simulation platform operating instructions
Amazing-Key-Pad
- here is a document describing KEy pad decoding techniques and C++ source code as well. it is show 74ls138 role in decoding.. hope it will be helpful. THANKS
main
- 是单片机程序，stm32串口通讯（查询方式）-stm32 serial communication (query)