资源列表
51_DS18B20_proteus
- 用51单片机写的DS18B20温度传感器显示模块，液晶模块为1602，包含proteus仿真。-With 51 single written DS18B20 temperature sensor module, LCD module for the 1602, including proteus simulation.
locks
- 单片机密码锁源程序，实现正确亮灯，错误报警功能-SCM locks the source, to achieve the correct lighting, error alarm function
Texas-Instruments-
- 基于zigbee的串口实验，利用CC2530向电脑发送数据。-Serial experiments based on zigbee
Source-Code
- 230v并网逆变完整资料源代码及编译好的固件 设计文档 实现了MPPT 电网幅值相位频率跟踪，并使得输出电流时钟与电网电压同相-230v grid inverter comprehensive source code and design documents compiled firmware implements MPPT tracking grid frequency amplitude phase and the output current in phase with the grid
display
- 使单片机MSP的P4 和 P5 输出口连接的数码管显示 1 和 2。-make the MSP microcontroller output port P4 and P5 connected digital display 1 and 2.
LED-blinks
- 选择不同的时钟源，使 P3.7 连接的发光二极管闪烁。 （1）使用 XT2 时钟源，8MHz 频率，用定时器 A 分频，产生 1s 脉冲，使 P3.7 引脚的发光二极管闪烁。-Choose different clock sources, so P3.7 connected LED blinks. (1) using the clock source XT2, 8MHz frequency divider with the timer A, the pulse generating 1s,
Timer-controlled-LED-flashes
- 定时器控制的发光二极管闪烁.这里使用了 MSP430F149 芯片的 32768Hz 低频晶体振荡器作为时钟 源。-Timer-controlled LED flashes
emitting
- 8 个发光二极管 1、3、5、7 与 2、4、6、8 交替发光的例子-Eight light-emitting diodes emitting 1,3,5,7 and 2,4,6,8 alternate examples
keyboard
- STM32驱动的4x4矩阵键盘程序，反转法，很好用的，有学习的可以下载下来看看。-STM32-driven 4x4 matrix keyboard program inversion method, the good, learning can download it and see.
Make-LED-flashes
- 使与 P3 口的 P3.0 引脚连接的发光二极管闪烁-Make P3.0 pin connection port P3 LED flashes
GSMSrc
- GSM SIM300 program library. Can read sms, send sms, delete sms. compatible and tested with 8051-family need at least 300bytes of RAM. Used P89v51RD2
GPCSrc
- GPS Library To Access the GPS Locations.