搜索资源列表
tonedrv.tar
- A tone driver by driving S3c2410 PWM. Compiled by arm-linux-gcc.-A tone driver by driving S3c2410 PWM. Compiled by arm-linux-gcc.
LPC3250_u-boot-1.3.3.tar
- NXP公司的ARM9 (LPC3250)下,绝对可用的uboot 源代码。网络、sdram、flash等一切正常。而且非常可靠。u-boot 的版本号是:1.3.3 .用ARM-linux-gcc 编译。-NXP' s ARM9 (LPC3250), the absolute uboot source code available. Network, sdram, flash and all is normal. And very reliable. u-boot version number
busybox-0.60.2
- 为samsung2410 ARM移植的busybox工具包,用作嵌入式linux的命令行接口-for samsung2410 ARM transplant busybox Kit linux for the embedded command line interface
ADSARM
- ARM编译指南,包括基本操作,开发步骤等,很好用-ARM compiler guide, including basic operations, the development of steps and so on, very good use
ARMv1_JpgShow
- 开发环境:ADS 1.2 开发平台:ARM7(S3C44B0)+LCD(TFT4.3")+NorFlash(4M)+SDRAM(8M) 项目功能:实现将NorFlash中的50个JPG文件在LCD上显示. 核心代码:JPEG 解码,LCD 驱动,ARM 启动代码 调试时,请将picture\jpeg.bin 烧写到NorFlash的0X20000地址处. -Development Environment: ADS 1.2 development platform: ARM7
ARM_training
- ARM开发中收集的ARM培训资料,感觉收益匪浅:整理共享下: 1:ARM编程技巧.ppt 2:ARM处理器内核介绍.ppt 3:ARM调试方案.ppt 4:ARM及Thumb指令集练习.ppt 5:ARM集成开发环境介绍.PPT 6:ARM架构.ppt-ARM collected ARM development training materials, feeling proceeds V.: Finishing share: 1: ARM programming skil
10
- 程序代码使用说明: (1)所有源代码目录下都提供了Makefile(非Qt),或者.pro(Qt),或者更详细的说明(第7章)。作为对比,也可以参考在书中的对应章节采用直接gcc命令的编译方法,来学习如何编写Makefile。 (2)Makefile中默认情况下采用“CC=gcc”或者“CPP=g++”的设置,交叉编译时请使用“ make CC=arm-linux-gcc CPP=arm-linux-g++”(假设你使用的是光盘中提供的arm-linux-gcc交叉编译工具链)或类似
09
- 程序代码使用说明: (1)所有源代码目录下都提供了Makefile(非Qt),或者.pro(Qt),或者更详细的说明(第7章)。作为对比,也可以参考在书中的对应章节采用直接gcc命令的编译方法,来学习如何编写Makefile。 (2)Makefile中默认情况下采用“CC=gcc”或者“CPP=g++”的设置,交叉编译时请使用“ make CC=arm-linux-gcc CPP=arm-linux-g++”(假设你使用的是光盘中提供的arm-linux-gcc交叉编译工具链)或类
s3c2410_ts
- 本源码是《ARM嵌入式LINUX设备驱动实例开发》一书的触摸屏设备驱动源代码-The source is ARM Embedded LINUX device driver examples of development of a book on touch-screen device driver source code
baseON_ARM_MPEG4.pdf
- 基于ARM的MPEG4视频解码器的优化。本文对嵌入式软件开发人员有参考价值,本人从事嵌入式多媒体软件开发。对MPEG4,ARM,MIPS有些研究,此文对基于ARM的MPEG4视频解码器优化为开发人员提供了新的思路。-ARM-based MPEG4 video decoder optimization. In this paper, embedded software developers have a reference value, I engaged in embedded multimed
Hand_made_ARM_LINUX_GCC_cross_compiler_tool_chain.
- 全手工制作ARM + LINUX交叉编译工具链-Hand made ARM-LINUX gcc cross compiler tool chain
2410pcb
- 2410开发板pcb图,源自freindy arm(友善之臂)-2410 development board pcb diagram
Linux
- 程序代码使用说明: (1)所有源代码目录下都提供了Makefile(非Qt),或者.pro(Qt),或者更详细的说明(第7章)。作为对比,也可以参考在书中的对应章节采用直接gcc命令的编译方法,来学习如何编写Makefile。 (2)Makefile中默认情况下采用“CC=gcc”或者“CPP=g++”的设置,交叉编译时请使用“ make CC=arm-linux-gcc CPP=arm-linux-g++”(假设你使用的是光盘中提供的arm-linux-gcc交叉编译工具链)或类
uart
- s3c2440串口代码,使用arm-linux-gcc编译,通过jtag烧写到开发板-s3c2440 serial code, the use of arm-linux-gcc compiler, programming to the development board via jtag
mpc-0.8.1
- 传说中升级gcc的mpc包,版本号为0.8.1-Mpc legendary upgrade the gcc package, version 0.8.1
9260kernel-porting
- AT91SAM926 ARM9 内核移植手册,非常实用,基于AT91SAM9260-EK开发板。包含以下内容: 1.准备所需要的软件和编译工具包 2.安装ARM-LINUX-GCC工具链 3.安装编译AT91BootStrap Bootloader 4.安装编译Uboot及AT91-Uboot补丁 5.安装编译Linux2.6.22及AT91-Linux补丁 6.安装下载工具AT91ISP及烧写文件 7.NFS根文件系统的建立 8.移植Boa Web服务器 9
arm-linux-gcc-3.3.tar
- 本代码是基于linux嵌入式的交叉编译器,已经配置好了,适合大多数用户尤其是初学者对交叉编译环境还很陌生的同学-This code is based on embedded linux cross compiler has been configured, for most users, especially beginners cross-compiler environment are still unfamiliar with the students
voiced
- linux 下的音频编程,里面包含有相应的库文件arm-linux-gcc 2.95 编译器编译,可以录音并保存文件,播放录音-audio programming under linux, which contains the appropriate library file arm-linux-gcc 2.95 compiler, you can record and save the file, play the recording
linux-module
- Linux设备驱动标准模板,用于s3c2410实验,流水灯点亮,下面有配套应用程序内核版本:2.6.31 交叉编译器:arm-linux-gcc 4.12 Read,write,ioctl等函数实现 S3C2410 GPF0~GPF3外接led灯,低电平点亮,高电平熄灭分别用write和ioctl 实现led流水灯的点亮经过验证,可点亮led流水灯-linux module
crosstool-0.43.tar
- 这是编译在arm平台上的运行程序的工具链(This is the tool chain that compiles the running program on the arm platform)