搜索资源列表
Bootloader038
- 基于dragon_MX1_ads的装载启动代码armboot-dragon_MX1_ads based on the loading boot code armboot
LINUX-DRIVER-demo
- 一个LINUX驱动程序摸板，采用模块加载，可依此摸板编写自己的特定的驱动程序。-a LINUX driver membranes using module loading, be prepared accordingly foil their specific driver.
elf
- 序言 1. OBJECT文件 导言 ELF头(ELF Header) Sections String表(String Table) Symbol表(Symbol Table) 重定位(Relocation) 2. 程序装载与动态连接 导言 Program头(Program Header) Program装载(Program Loading) Dynamic连接(Dynamic Linking) 3. C LIBRARY
key
- lpc3250编写测试成功的linux2.6.28内核下的按键驱动源码，允许动态加载和卸载。-lpc3250 successful linux2.6.28 writing test buttons under the kernel driver source code, allowing dynamic loading and unloading.
led
- lpc3250编写测试成功的linux2.6.28内核下的led驱动源码，允许动态加载和卸载-lpc3250 successful linux2.6.28 writing tests led under the kernel driver source code, allowing dynamic loading and unloading
kernel2.6.30
- 对于2.6.30.4内核移植于s3c2410开发板的步骤和驱动加载-For the 2.6.30.4 kernel porting steps in s3c2410 development board and driver loading
sjf2440_UserGuide_v1
- for loading u-boot embedded
VT6656_Linux_x86_1.12_07_src_beta_SAE
- 适合在MX21开发板上面的无线网卡驱动程序，可以直接进行交叉编译，加载到开发板上面。-MX21 development board suitable for the above wireless card drivers, can be directly cross-compiling, loading into the development board above.
qdma
- dm6467板卡中dma模块源码，加载后可以通过调用dma传输数据-dm6467 board in dma module source, after loading the data can be transmitted by calling the dma
sja1000
- lpc3250编写测试成功的linux2.6.28内核下的sja1000驱动源码，允许动态加载和卸载-lpc3250 successful linux2.6.28 write tests under the sja1000 kernel driver source code, allowing dynamic loading and unloading
LoadImageWithSocket
- 在上次的加载图片程序上新增了socket功能，可以在切换图片的同时与运行于PC端的MenuServer建立TCP通信，将当前图片的路径信息发送至server端。-Procedures in the last loading pictures added socket feature, you can switch the pictures in the same time and run on the PC side of the MenuServer establish TCP communi
linux-driver-setup
- 怎样给内核版本为2.6.30.4添加驱动，本例为一个空的驱动，主要是修改Kconfig和Makefile文件，采用modules动态加载-How to add kernel version is 2.6.30.4 driver, in this case an empty drive, was modified Kconfig and Makefile, use dynamic loading of modules
adc_tp
- 将韦东山的书籍中：嵌入式Linux开发手册中，adc和tp的在linux环境下代码，移植到MDK环境中个运行。 使用分散加载文件，可以选择runinram or run inflash。 此程序在mini2440开发板上验证过。-Wei Dongshan' s books: Manual of embedded Linux development, adc, and tp the linux environment code, ported to run MDK environme
DM644x_FlashAndBootUtils_2_00
- Serial Boot and Flash Loading Utility
mybuttons
- 本代码是基于linux下的按键驱动代码，加载后就可以用，经过调试没有错误-Under this code is based on the Linux device driver code, can use after loading, after debugging has no errors
led_cdev
- 功能描述：简单的LED杂项设备驱动，在做好AMR9开发板根文件系统后，加载该驱动程序和控制的应用程序能实现LED灯的亮灭控制-Function Descr iption: LED miscellaneous equipment simple driver, do a good job in the development board AMR9 root file system, light control application program loading the driver and co
cubieboard-master
- bluetooth中为蓝牙测试demo:检测周围的蓝牙设备，连接设备，循环发送数据 broadcom-bluetooth：固件源代码，以及加载固件的命令 com：cubieboard从串口读取数据，再通过tcp发送 特点：epoll com_bt：cubieboard从串口读取数据，通过tcp和蓝牙发送 特点：epoll 线程 信号-Connection device for Bluetooth, Bluetooth Test Detection
ismounted
- linux下磁盘挂载判断模块，避免使用脚本操作磁盘，直接可以用于项目的工业级代码，经过了项目的严格测试，测试覆盖率100 -Linux disk loading judgment module, to avoid using the scr ipt to operate the disk, can be directly used for the project s industrial-grade code, after the project s rigorous testing, test