资源列表
3KW_Inverter
- 基于瑞萨RX62T芯片的3KW变频矢量控制方案源代码，简单且实用，有参考意义。-3KW vector control source code based on RX62T, simple but understandable and helpful.
stm32-DHT11
- stm32 操纵DHT11温湿度传感器获取数据-Stm32 manipulates DHT11 temperature and humidity sensor to obtain data
PIT-timer
- 飞思卡尔xs128单片机，codewarrior软件，c语言编程，PIT模块实现定时器功能程序-freescale xs128 SCM，codewarrior app，c language，PIT timer
switch
- AVRmega8单片机用IO口模拟串口通信 波特率1200，2400，4800，9600可选择-AVRmega8 microcontroller with IO port analog serial communication baud rate 1200,2400,4800,9600 optional
volume
- STC15W204S单片机的音量，控制器左右声道独立控制，杰理AC1082状态控制，内置3种正弦波音频信号，用于音响类开发-STC15W204S, the volume of the single chip microcomputer controller around a track control independently, jie AC1082 state control, built-in 3 kinds of sine wave audio signal, is used to so
MB91F59x_CAN_Bootloader_V1.1_53B_DM
- 富士通单片机底层驱动，关于MB91530的启动代码，可以作为参考，来写自己的bootloader.-Fujitsu microcontroller bottom drive, MB91530 on the boot code, can be used as a reference to write their own bootloader.
SG90
- 程序是基于STM32F103ZET6实现舵机调试，源码可以实现用户给指定角度，然后舵机转到相应角度-Procedure is based servo STM32F103ZET6 achieve debugging, source code may be implemented for the user to specify the angle, and steering angle corresponding to
PLC
- 自制plc 源码程序。 有51单片机制作plc 源码程序+源流图 +sch+pcb图 还有国外开发人员编写的 avr单片机制作plc程序 +原理图+sch+pcb图-Homemade plc source code procedures. There are 51 single-chip production plc source code+ source map+ sch+ pcb map There are foreign developers to prepare the avr
CCD_STM32
- 本程序是使用STM32开发蓝宇第四代线性CCD的例程，附有CCD与STM32的接线说明。程序是基于STM32F103ZE单片机的，可移植。-This procedure is the use of STM32 development Lan Yu fourth generation linear CCD routines, with CCD and STM32 wiring instructions. The program is based on the STM32F103ZE microco
CAN
- stm32的can检测程序，环回自测和普通模式两种-can communication check
6-3-HT-Hawk(KEIL-MDK)
- 四旋翼无人机飞控代码，采用MPU6050姿态传感器，串级PID控制，实现无人航空新篇章-Quadrotor UAV flight control code, using MPU6050 attitude sensor, cascade PID control, unmanned aerial chapter
BPC_dpz
- BPC电波钟程序, 精准对时时钟，用数码管显示。-BPC dianbozhong.