资源列表
gm16C550
- 一种gm16c550的c51程序,我花几天时间搞的
23456
- DSP处理，经典的FFT变换C源代码，我参考过很多其他的FFT程序，但我认为这个是最好的
show
- 开发平台是ICCAVR的，是一个用于单片机的七段数码管显示程序-Development platform is ICCAVR is a paragraph for the MCU digital tube display program
clock
- 基于at89s52的电子钟汇编源程序。采用八位数码管，时、分、秒之间一短横线隔开。可实现计时，修改时间等简单功能。-AT89S52-based electronic clock source compilation. It uses eight digital tubes, to represent hours, minutes, seconds and with short dashes between them . Can achieve easy functions such as tim
LCD16024line
- LCD1602 4线连接方式可以达到只使用7个I/O口即可满足要求-LCD1602 4 wire connection can be achieved using only seven I/O port can meet the requirements
eeprom_use
- stc 单片机的eeprom的使用，简单的擦写等。-stc eeprom microcontrollers use flash and so simple.
key_master_0621
- 关于4*4矩阵键盘扫描电路verilog代码设计，支持Avalon总线-On the 4* 4 matrix keyboard scanning circuit verilog code design, support Avalon bus
pwm
- 51单片机按键控制产生pwm并控制转速，数码管显示转速。-51 single button control and generate pwm speed control, digital display speed.
X1205_IIC_Interface_Program
- 本程序是EEPROM X1205芯片IIC通讯接口配置程序，并早已成功通过实际项目验证测试，请大家放心应用。-This program is EEPROM X1205 chip IIC communication interface configuration program, and has already successfully passed the validation test of the actual project, please rest assured that applic
msp430g2xx3_uscib0_i2c_01
- I2C接口TMP100温度传感器在9位模式。 计时器一CCR0中断用于醒来,读这两个字节的 TMP100的温度寄存器每62毫秒。如果温度大于28 c,p1 0设置,否则复位。在LPM0 CPU操作。 速度~ 100 khz I2C。-I2C interface to TMP100 temperature sensor in 9-bit mode. Timer_A CCR0 interrupt is used to wake up and read the two bytes of
Environment
- Global environment configurations for showing soft keyboard and candidate view Source Code for Linux.
code
- uld2003驱动芯片，五线双八拍步进电机。-ULD 2003 driver chip, dual eight-beat five-wire stepper motor