资源列表
1
- 将双字节无符号二进制数转换为压缩 BCD数的子程序。 双字节无符号二进制数的地址放在 R0 中； 存放转换结果（ BCD 数）的地址放在 R1 中。(The subroutines of converting double byte unsigned binary numbers to compressed BCD numbers. The addresses of double byte unsigned binary numbers are placed in R0. The add
HEX文件
- 基于stc15系列单片机的温湿度传感器数据显示代码(Data display code of temperature and humidity sensor based on stc15 Series MCU)
GPIO
- 使用stm32的gpio的引脚5通过中断法最终实现led灯的点亮。(Use the STM32 pin 5 to light the LED lamp.)
S3C9454C例程
- 没有什么好说的，自己去看就是了，如果看不懂那我也没有办法了，自己领悟吧(There's nothing to say. I'll go and see it. If I don't understand it, I can't help it.)
流水.~(1).PRJPCB
- 流水灯系统基于单片机,原理图和封装。七八九十(Singlechip fctxfxcvbtctxtxtcc)
WS2812
- 采用spi模拟ws2812时序，stm32F4采用dma传送数据，库文件为stm32标准库(SPI is used to simulate ws2812 timing, stm32F4 uses DMA to transmit data, and the library file is STM32 standard library.)
TwoStage_Miller_Compensation
- 基于matlab的二级米勒运放的补偿方法(Compensation method for two stage Miller operation amplifier based on MATLAB)
IIC
- PCF8563C语言程序，已经应用于工程，可放心使用。(PROGRAM FOR PCF8563,HAS BEEN USED IN PROJIECT.)
TM1651
- TM1651 LED驱动控制专用电路C语言驱动源码(TM1651 LED IC Deriver Code)
TLV5630_STM32F4
- TLV5630_STM32F4驱动程序 （源程序及头文件） 原创程序， 内含寄存器推荐配置，可自行移植至其他开发平台(TLV5630 driver for STM32F4, (source and header file), Original program, including register recommended configuration, can be transplanted to other development platforms.)
软件看门狗
- 看门狗定时器（WDT，Watch Dog Timer）是单片机的一个组成部分，它实际上是一个计数器，一般给看门狗一个大数，程序开始运行后看门狗开始倒计数。如果程序运行正常，过一段时间CPU应发出指令让看门狗，重新开始倒计数。如果看门狗减到0就认为程序没有正常工作，强制整个系统复位。(The watchdog timer (WDT, Watch Dog Timer) is a component of the single chip computer. It is actually a count
bmp180
- bmp180读取温度气压，通过1602显示(Bmp180 reads the temperature pressure, show with 1602)