资源列表
create_200m
- 本代码用于产生FPGA内部的一个200Mhz的时钟，使得内部信号在此时钟下同步工作
GPIOROM
- verilog gpio source code verilog
TEST2
- nrf24l01z无线模块通信接收部分程序-I don t know english！
51-Infrared-emission-program
- 51红外发射程序 无线传输的好帮手 绝对好用-51 wireless infrared emission process a good helper
8x16DotArrayDisplay
- AT89C52RC下的串行点阵驱动程序。-This is a 8-line, 16-column dotarray s driver file.Main CPU is AT89C52RC ,use serial interaction.
BT656PcolorBarPFPGA
- Altera的EP2C5Q208C8芯片上跑通，后端接tw2880芯片输出上TV，进行验证无误。 i_pclk是27Mhz输入时钟，o_pclk是27Mhz输出时钟；i_clkin是笔者用的开发板50Mhz时钟，只用于生成稳定的复位信号。-Ran on Altera' s EP2C5Q208C8 chip pass, after termination tw2880 chip output on the TV, to verify correct. i_pclk 27Mhz in
6678
- 用CCS5.2编写基于TMS320C6678的C程序。实现脉冲压缩，MTI以及MTD.-The written CCS5.2 TMS320C6678-based C program. Pulse compression, MTI and MTD.
main
- 一个基于c语言的51单片机程序，可实现对旋转物体转速的测量，采用对射式光电开关，产生与旋转物体相对应的脉冲信号，以单片机采样脉冲信号，计算每分钟脉冲信号的数目，即电机对应的转速值，通过数码管实时显示电机的转速值；转速测量峰值大于100r/s，实时显示转速。 -Based on 51 MCU c language program, enabling measurement of the speed of rotation of the object, using the beam photoe
sillog
- 遥控电子钟控制程序 当年的专业设计 -Remote electronic clock control program year professional design huh
DS1302-for-lpc1114
- 这是一个DS1302实时时钟运行在LPC1114上的子程序，程序经过调试，可以运行。-this is a programe for DS1302 which running on the LPC1114,the .c is pass the debugging.
MAX6675-driver
- driver for the MAX6675, a chip which interfaces to a K-type thermocouple over a simple SPI bus. The driver implements a software SPI port, so there is no need for dedicateed hardware- any 3 GPIO pins can be used.
RT-ADDRESS
- 芯片驱动控制程序 61580 1553b rt-61580 1553b rt