资源列表
mcfsqdsp3
- 一种脉冲发生器的实现，可用于PWM控制中-The realization of a pulse generator can be used for PWM control
dual_RAM
- vhdl语言编写的双口ram及testbench,模块可以在modelsim里进行时序和功能仿真。-vhdl language of the dual-port ram, and testbench, modules, conducted in the modelsim timing and functional simulation.
CONVOLUTIONAL_INTERLEAVER
- DVB数据交织,交织深度I=12,已得到应用!-DVB data interleaving, interleaving depth I = 12, has been applied!
3
- 12864显示温度,准确到小数点后三位，灵活应用液晶显示的指令-display tempreture
Main
- 变频器主程序。PIDSP30F2010主芯片-Inverter main PIDSP30F2010
51mcu_4Key_LED_CODE
- 基于51单片机的4个按键4级变速的跑马灯试验，单片机教程：http://www.ipbb.cn，主要是用４个按键分别控制４个级别的LED灯的速度，希望对初学单片机的朋友有帮助！-Based on the trial of the Marquee of the 51 microcontroller 4 button 4 speed, microcontroller tutorial: http://www.ipbb.cn, mainly with the 4 buttons to control
282838p
- ST7735 简单刷屏测试程序，51单片机代码-ST7735 the simple Shuabing test program, 51 microcontroller code
DA_MAX504
- max504 10位串行D/A的转换 C程序,对应4~20mA电流输出程序-max504 10-bit serial D/A conversion of the C program, corresponding to 4 ~ 20mA current output program
1602-LCD-dynamic-display
- 通过51单片机实现1602液晶动态显示的功能-51 MCU 1602 by a dynamic display function
UART0
- This file is written to send inertial sensors data to rs232 serial port. The file is for TMS320**** family DSP.
jiaotongdeng
- 单片机程序 模拟交通灯显示其中，红灯与绿灯显示时间均为50s，中间的黄灯显示时间为15，绿灯用八位发光二极管流动闪烁作代表； 红灯用八位发光二极管全亮作代表； 黄灯用八位发光二极管全亮全灭闪烁作代表。 刚开始显示的为绿灯。 显示顺序：绿 黄 红 黄 绿 黄 红 -Traffic lights simulation single-chip microcomputer
Frequency
- 先用计数法测频率，判断大小，高频直接显示，低频就用测周法，测出后显示-First, using the counting method to measure the frequency, judge the size, high-frequency direct display, low frequency on the measurement of the week, measured after the show