资源列表
Omnivision SCCB interface verilog model
- Omnivision SCCB interface verilog model
timer
- dsplf2407定时器使用 开发环境ccs2000 运行通过 适于dsp初学者使用-dsplf2407 timer use
Blk
- 是VXWORKS 块设备驱动模板，请新建加载型工程再添加-Is a block device driver VXWORKS template, add new load-based engineering
verilog
- 数字锁相环电路verilog源代码 开发环境quartus-Digital PLL circuit verilog source code
fsm_moore_2_always
- 使用2個always去描述有限状态机的3個block，state register與next state logic合一 -state register and next state logic
display
- at90s52单片机 键盘扫描 数码管显示-keyscan and numerating display
drv_93c46
- 93C46读写程序，8位数据格式, 93C46读写程序，8位数据格式-93C46 read write program，8bits format
paobiao
- 数字跑表，包含百分秒、秒、分，能在FPGA上下载并显示-Digital stopwatch, including hundredths of a second, seconds, minutes, can be downloaded and displayed on the FPGA
PID
- 电阻炉温控系统中PID算法模块，用于PID控制-resistance furnace
syn_FIFO
- 同步FIFO，主要用于数据缓存，给异步FIFO打下基础，是个不错学习例子，在ncverilog中仿真通过-Synchronous FIFO, mainly used for the data cache, and lay the foundation to the asynchronous FIFO, is a good example of learning through simulation in ncverilog
key
- 按键状态机程序，可实现按键按下，长按，弹起三种状态，在定时中断里每隔10MS调用-Key state machine procedures, can be the key press, long press, bouncing three states where the timer interrupt every 10MS call,
i2c
- 自己写的I2C模块，经调试可用在EEPROM,或者其他需要的地方-Write their own I2C module, the debug is available