资源列表
fifolifo
- fifo filo verilog 程序！先入先出数据存储器的程序和先入后出程序！-fifo filo verilog program! First in first out data memory of the program!
8-bit-Multiplier
- 一种基于加法器树方法的8为乘法器的VHDL源码，该方法虽然相对占有资源多，但仿真快-VHDLSourceProgramof8-bit-Multiplier
snag
- 4人抢答器的VHDL源代码.当设计文件加载到目标器件后，按下核心板复位按键，表示开始抢答。然后，同时按下S1-S4，首先按下的键的键值被数码管显示出来，对应的LED灯被点亮。与此同时，其它按键失去抢答作用。-4 Responder of the VHDL source code
5time
- Before calling the subroutine " mpy ", the multiplier should be loaded in location " mulplr ", and the multiplicand in " mulcnd " . The 16 bit result is stored in locations H_byte & L_byte.-Before calling the subroutine " mpy ", the multipli
RANDOM-CHARACTERS
- This using Keil uVision 3 and Atmel Flip 3.4.3 The code is tested using 8051 microprocessor chip. 1) Copy and paste the attached code to Keil uVision. 2) Use the link below to configure in Keil for the 8051 chip. download here: https:/
Stepper-motor
- 按键控制电机正反转，数码管动感显示正反转p1.0键为反转 p1.1键为停止 p1.2键为正转-Buttons to control the motor rotating, and dynamic display of the digital control Reversible the the p1.0 key for reverse p1.1 key to stop the the p1.2 key forward
qudong
- 步进电机驱动程序 非常有用 小车设计 设计大赛专用-Stepping motor driver
dianji
- 基于51单片机的电机转动程序，电机自转三圈后停，可以控制！-51 MCU-based motor rotation program, three times the motor' s rotation after the stop, you can control!
pic16f57
- 实验目的：RA0-RA5,RB0-RB7，RC0-RC7口的流水灯，熟悉PIC16F57的I/O口的操作-Purpose of the experiment: RA0-RA5, RB0-RB7 RC0-RC7, mouth water lights, familiar PIC16F57 I/O port operations
74HC166
- 74hc166 8并行入1串行出 例程程序-74hc166 8 parallel into a serial program
PWM_Timer0
- stc12c5a60s2基于Timer0实现的8位软件PWM，修改后可以多路使用。原创-stc12c5a60s2 based software Timer0 to achieve eight PWM, modifications can be multiple use. Original
HC-SR04
- PIC单片机用来驱动HC－SR04超声波测距传感器的驱动源代码。可以方便的使用。-PIC microcontroller to drive HC-SR04 ultrasonic distance sensor driver source code. You can easily use.