资源列表
SSD1325_graf_lib
- Display Driver for OSRAM/univision/Data-Modul and other equal OLED 2,7" with SSD1325. C-functions fpr initialisation, font-defines, low-level-grphic-functions to draw and so on... Writing in C (IAR-comp.) for Atmel Mega128.
T6963rr_sw_guide
- graphic lcd driver guide for lcd controller driver providing good information
ADspi
- msp430f449用spi口驱动D13E程序-msp430f449 spi D13E program
AD
- MSP430F449的采样子程序，MSP430F449的采样子程序-MSP430F449 AD program
89ISP
- very good programmer for 8051 processor basedd system
PCF8591ADC
- 这是一个 用飞利浦的PCF8951ADC/DAC的程序 -This is a program with Philips PCF8951ADC/DAC
c
- 主要可以用于锂离子电池的充电简单的控制程序实现，需要结合相应的电路图来完成测试。-Can mainly be used for lithium-ion battery charging control program to achieve a simple, requires a combination of the corresponding circuit to complete the test.
DSPBIOS
- DSP关于BOIS方面很好的资料，请大家下载吧~-DSP in very good information about BOIS, please download it ~ thank you
seriol
- verilog的串口发送程序编写，实验证明是正确的，并且经过多次调试-verilog serial transmit programming, experiments proved to be correct, and after several debugging
led
- verilog的程序，调试按键以及led显示内容，编写灵活简单，可以借鉴-verilog program, debug button and led display, write simple and flexible, you can learn from
AD_TEST
- 1、 本工程主要是把输人AD芯片的电压显示在数码管上。 2、 测试时，从JTAG口把AD_TEST.sof下载到FPGA，右边的4个数码管将会显示电压数据（单位：毫伏）。 -1, this project is mainly to AD input voltage displayed on the digital chip tube. 2 test, from the JTAG port to AD_TEST.sof download to the FPGA, the right o
beep_v
- 1本工程主要是设计一个嗡鸣器的控制模块。 2通过TAG口把beep.sof下载到FPGA后，嗡鸣器就会有声音发出-A project is to design a buzz of the control module. 2 by TAG mouth to beep.sof downloaded to the FPGA, the device will have a buzz sound issue