资源列表
I2C_v
- 本工程主要是介绍操作一个I2C总线接口的EEPROM AT24C08的方法，使用户了解I2C总线协议和读写方法。 2、通过JTAG口把I2C_FPGA.sof下载到FPGA后，请先长按reset按键大约1秒左右，以进行初始化。按一下实验板上的KEY1键，计数器加1计算，并把计算结果写入EEPROM，并同时显示在数码管最低位，按KEY0把EEPROM的数据读取出来，并显示在数码管上。-Operation of this project is to introduce an I2C bus inte
PS2_v
- 1、本工程主要是设计一个键盘的控制模块，2、把键盘链接到实验板上，通过JTAG口把PS2.sof下载到FPGA后，在键盘上的输人则会在实验板上的数码管显示相应的ACSII码。-1, this project is to design a keyboard of the main control module, 2, the keyboard linked to the experimental board through the JTAG port to PS2.sof downloaded t
test_42(NEW)
- verilog矩阵键盘扫描程序,编写简单易懂，4X4矩阵键盘读取，比通常的编写更加简单-verilog matrix keyboard scanner, writing easy to understand, 4X4 matrix keyboard to read, write more than the usual simple
uart_verilog
- 本工程主要是设计UART接收模块,UART发送模块以及通过COM口接收数据后又发送给PC的uart模块。-The project is mainly designed to UART receiver module, UART transmit module and receive data through COM port and then sent to the PC uart module.
test_41(NEW)
- verilog点阵显示，编写容易简单，没有普通的程序冗杂，值得借鉴-verilog dot matrix display, easy to write simple, there is no common procedure jumbled, worth learning
SOPC
- SOPC基础教程，包括FPGA的基本开发流程，并带有两个例程详细说明，以及SOPC的开发流程并带有两个例程加以详细说明-SOPC-based tutorials, including the basic FPGA development process, with a detailed descr iption of two routines, and the SOPC development process and elaborate routines with two
inverter_KEY
- 本文件为通用型变频器控制键盘程序源代码，采用AT89C51芯片，汇编语言。希望能给变频器爱好者提供参考。-This document is general-purpose inverter control keyboard source code, using AT89C51 chip, assembly language. I hope to give fans a reference frequency.
AD
- AD 430 按键 主要有按键菜单功能-AD 430 the main button menu function keys
lighten-a-LED
- 点亮一盏灯,是一个51单片机的程序，适合新手使用。-lighten a light
Slaver-program
- 工作平台为IAR Embedded Workbench for ARM 6.10。能实现NRF24L01通信功能。-IAR Embedded Workbench for ARM 6.10 NRF24L01 communication each others
Embest_SAM9G45
- Embest SAM9G45 board schematic and manual
gpio_test
- Ronetix PM9263 Board GPIO Test stand alone application