资源列表
COM_REV
- 基于FPGA的串口接收程序,标准通用的串口接收程序-FPGA-based receiver program
NOKIA5110-LCD-DRIVER
- 诺基亚5110的驱动程序，主要用于单片机的开发，充当显示模块。-Nokia 5110 driver, mainly for single-chip development, act as a display module.
USBPADS8509PFLASH
- 实现STM32F103的USB批量传输，并且带有读写flash以及ADS8509的AD转换，经测试，可用，写的有点乱，有问题可以留言。-Achieve STM32F103 of USB bulk transfer, and with read and write flash and ADS8509 AD converter, tested, can write a bit chaotic, there are problems you can leave a message.
Cross-Correlation-matlab-implemenation
- Auto correlation and cross correlation are the most important aspects in the DSP domain. This code implements the same.
Pic18_BootLoader
- Pic18单片机Bootloader源代码-Pic18 MCU Bootloader C Code
EncoderForArduino
- Arduino平台中实现旋转编码器的运行库，可支持中断接口或非中断接口。-A library file of encoder for Arduino.
51程序160例子
- 51单片机的160个例子，从初学者开始，涵盖了led和lcd等基本外设。
STM8_Freemodbus
- 基于stm8s的freemodbus协议移植-Transplantation of freemodbus protocol based on stm8s
enery_chuanlian2
- 针对嵌入式装置中的相关模块电压不同，编写的C程序，将电池电压自动转换控制，实现对装置的远程监控。-According to the voltage of the related modules in the embedded device, the C program is written, the battery voltage is automatically converted to control, and the remote monitoring and control of the
HCTL-2032-Encoder
- 1 两路编码器输入通道 2 采用专用编码器计数芯片完成计数工作 3 与上位机串口通讯-1 two-way encoder input channel 2 using a dedicated encoder chip count as counting work 3 serial communication with the host computer
encoder-Profile
- 设计编码器读取所精心准备的开发资料，希望对大家有所帮助-Design development encoder read the information carefully prepared, we hope to help
12864ADC
- 12864电压表(ADC例程)+软件滤波-12864 voltmeter (ADC routine)+ software filter