资源列表
BLHeli-16
- 无刷电机驱动，支持51和AVR两款单片机-Brushless motor drive, support 51 and AVR two MCU
FPGA_拉格朗日插值_IP
- fpga实现拉格朗日插值，本工程采用verilog语言实现，可直接使用
MYLIB
- 常用C语言库，包含字符转数字，查找字节流，日期转换.- Commonly used C language library, including characters to digital, to find byte stream, date conversion
I2C_Slave_pudn
- i2c 作为slave端的GPIO模拟通信源码-i2c slave gpio code
Boot
- 本项目文具设计让你和CodeWarrior MC9S12DP256B快速运行。 -This project stationery is designed to get you up and running quickly with CodeWarrior for MC9S12DP256B.
led
- atmega128 led control source
heatPWMPID
- PID温度控制代码，增量式PID调节，调节效果显著，学习的好代码-PID temperature control code, incremental PID regulator, adjust the effect is significant, a good learning codes
code_lagrange_interpolation
- 使用verilog实现拉格朗日插值，很有使用价值，有需要的可以参考一下-Use verilog to achieve Lagrange interpolation, very useful value, there is a need to refer to
bpc
- 基于ATMEL8位单片机的中国码电波钟程序-A source code for BPC radio controlled clock
1602verilog
- 采用Verilog语言完成了1602液晶屏的驱动显示-Using Verilog language to complete the 1602 LCD screen driver display
WangSPIreadflashCode
- C6457的bootloader的烧写工程，从CCS生成的.out文件烧写到FLASH中，ccs5.5编译。-C6457 the bootloader of the burning project, the CCS generated. Out file to write to FLASH, ccs5.5 compiler.
Project
- STM32F407系列单片机多串口收发测试代码，串口1，串口2，串口3，串口4，同时发送数据，然后从串口5，转发从串口1，串口2，串口3，串口4接受到的数据。-Serial port 2, serial port 3, serial port 4, and send data, and then the serial port 5, forwarded the serial port 1, serial port 2, serial port 3, the serial port 4 to