资源列表
apb_spi
- Simple SPI interface realization on Verilog HDL with parameterized FIFO and APB interface
apb_i2c
- Simple realization of I2C interface on System Verilog HDL with support of interrupt generation.
ahb_ebc
- Sipmle external bus controller realization on Verilog HDL with AHB interface. Support RAM/ROM/NAND Flash devices.
timer
- Simple 32-bit timer realization with APB interface with support of interrupt generation and switching clock source.
jtag_slave.4
- 1.1 Compliant with IEEE 1149.1 1.2 Support mandatory BYPASS, SAMPLE/PRELOAD, EXTEST instructions 1.3 Support user register connection beetween TDI-TDO 1.4 Boundary-scan register consist of cell type BC_1
adc7606
- 给FPGA程序,使之产生信号,驱动AD7606读取数据,并行模式。-give FPGA signal to read AD7606
clock
- 用51单片机实现时钟,闹钟,贪睡功能等。按键控制采用独立按键和复用按键。-With 51 single-chip to achieve the clock, alarm clock, snooze function. Key control using independent keys and multiplexing keys.
STM32_AHRS_WorkDir
- 一套注释详细的飞控源码。飞控芯片采用了stm32,包含pid 姿态解算 数据融合等。-A set of detailed notes of the flight control source. Flight control chip uses stm32, pid attitude solution comprising data fusion.
vhdl
- (1) 在十字路口的两个方向上各设一组红、绿、黄灯,显示顺序依次为红灯-绿灯-黄灯-红灯。 南北方向和东西方向红灯绿灯相反。南北方向红灯显示时间为东西方向黄绿灯显示时间的总和,同理,东西方向红灯显示时间为南北方向黄绿灯显示时间的总和。 (2) 设置一组数码管,以倒计时的方式显示允许通行或禁止通行的时间,其中绿灯、黄灯、 红灯的持续时间分别是7s、2s和9s。 -(1) a set of red, green and yellow lights are arranged in each
DA_TLC5620vhd
- 通过4个按键选择不同通道,每个通道的数字量输入都可以在数码管上进行显示。 松开按键,则计数显示保持前一状态,按下按键继续计数。设置复位键,按下复位键,系统清零。 每个通道对应的模拟电压通过LED的亮度显示。-Through the 4 keys to different channels, each channel digital input can be displayed on the digital tube. Release the button, then the
SRF05_8051
- Use SFR05 to measrure distance with 8051
balance-car
- 飞思卡尔竞赛 电磁二轮平衡车直走+蓝牙代码 方便平衡车学习者学习-Freescale contest electromagnetic two Ping Heng car go straight+ Bluetooth code is easy to Ping Heng car learners
