资源列表
MAKEAMIF
- 用于生成xilinx开发环境中存储器ip core的mif数据文件的程序代码。(this program is used to generate mif file used by xilinx memory ip core.)
MAKEXCOE
- 用于生成xilinx开发环境中存储器ip core的coe数据文件的程序代码。(this program is used to generate coe file used by xilinx memory ip core.)
crc8_8_serial
- 自己编写的高效8位输入串行CRC-8 ATM程序(an effective program for 8bit serial input CRC-8 ATM calculate.)
sumsang_flash
- 用于单片机系统的三星nor flash通用驱动程序.(a generic driver for sumsang nor flash for mcu)
Allwinner_V3s_Datasheet_V1.0.pdf
- 全志v3s的datasheet。详细的寄存器说明。 全志v3s介绍：内置64M ddr内存，qfp封装(V3s of datasheet. Detailed register instructions. Whole chronicles v3s introduction: built in 64M DDR memory, QFP package)
STM32超声波测距
- STM32F103C 超声波测距程序，径过测试 可使用(STM32F103C ultrasonic ranging program, diameter pass test can be used)
csvOperater
- 用c语言控制台程序，打开csv文件，进行单元增删改 方便整理数据(c console program to control the csv file ,to add delete modify cells for data operation.)
bus
- 公交车系统基于FPGA芯片的基础上，增加了数码管显示模块、语音自动报站模块、红外通信模块。站牌系统采用以FPGA为核心的主控芯片，增加液晶显示模块、红外通信模块、RS232总线模块、指示灯显示模块等。(The bus system is based on FPGA chip. It adds digital tube display module, voice automatic reporting module and infrared communication module. The bu
第三十九章 FLASH模拟EEPROM实验
- 《STM32开发指南》第三十九章 FLASH模拟EEPROM实验("STM32 Development Guide" thirty-ninth chapter FLASH simulation EEPROM experiment)
heartbeat
- 整个程序由心率传感器模块，体温传感器模块，3D计步器模块，FPGA开发板，A/D转换器，LCD显示屏等组成。(The entire program module by heart rate sensor, temperature sensor module, 3D pedometer module, FPGA development board, A/D converter, LCD display etc..)
STM32F10x_StdPeriph_Lib_V3.5.0
- STM32F10x函数库V3.5.0版本(STM32F10x_StdPeriph_Lib_V3.5.0)
dianziqin
- 基于FPGA的电子琴动态录音与回放系统在FPGA的基础上设计系统的核心功能模块，再配合相应外围电路，在实现了电子琴基本功能的同时，还增加了演奏音乐的存储功能。(The core function module of FPGA electronic organ dynamic recording and playback system based on FPGA based, together with the corresponding peripheral circuit, in the re