资源列表
keybord
- 里面包含4×4矩阵键盘模块 单片机驱动程序 STM32用 C语言版-Which contains 4 × 4 matrix keyboard module driver STM32 microcontroller using C language version
YCbCr_RGB_10bit
- YCbCr 转 RGB模块，以应用于项目中。 该模块可将10bitYCbCr分量视频转换为12bitRGB视频，需消耗乘法器。-YCbCr turn RGB module, to apply to the project. The module can be 10bitYCbCr component video converted to 12bitRGB video, need to consume multiplier.
YCbCr2RGB
- verilog 实现的YCbCr到RGB得转换-verilog implementation YCbCr to RGB was converted
S6D04D1_initial_code
- S6D04D1是一颗当前应用并不多的WQVGA LCD驱动和控制IC,此份初始化代码是S6D04D1配HITACHI3.0" LCD的方案.-The S6D04D1 is not a widly used LCD controller&driver IC, this initial code is suitable for case of S6D04D1+HITACHI 3.0" LCD panel.
UBOOT2010.06
- uboot2010.06版本的移植说明（持续更新）-uboot2010.06 version of transplantation note (continuously updated)
max197
- C语言编写的基于51单片机的AD转换器MAX197的程序。-C-51 based microcontrollers written in AD converter MAX197 procedures.
Test_Download
- CY7C68013通过SPI接口下载固件至ADNS-3080后的测试代码。-CY7C68013 through the SPI interface to download firmware to the ADNS-3080 after the test code.
485
- 周立功 485 用户指导手册，很强大。有详细电路图，不用找型号上面很清楚。 老外写的485通讯例子.485_guide.pdf RS485协议.pdf 485通讯.rar RS232转RS485电路图.doc RS485协议 485总线常识.pdf 485总线应用与选型指南.pdf 看完后基本不用找别的了。 -ZLG 485 user guide, very powerful. A detailed circuit diagram, do not look for models abov
xunxian
- 巡线小车的程序 mega16 主控芯片 st1-Patrol Line Vehicle program mega16
nanoRanging
- 基于nanoloc以及 avr1280的测距程序-Based on nanoloc and avr1280 ranging program
FPGACPLD_protel3
- protel中fpga封装库3，非常难找的-protel library in fpga package three, very difficult to find the
MS5540C
- 基于STM32微控制器，利用MS5540C设计的高度传感器。-Based STM32 microcontrollers, designed by MS5540C height sensor.