资源列表
vspdxp
- 一个单片机应用系统可以通过串行线在上位机中进行操作 控制，可以选择单片机6个端口作为模拟设备操作对象-A microcomputer application system can be operated via a serial cable to control the host computer, you can select the MCU 6 ports operate as an analog device object
rs232
- 51单片机延时函数 外层循环n次 内层循环110次-51 single delay function of the outer loop n times the inner loop 110
CHENGXU
- 基于51单片机和L298N的按键控制步进电机和LCD显示-available program
chengxu
- 基于单片机的播放国歌C语言程序,只要将端口匹配就快可直接-it is an available program
123
- 实现两驱小车控制，具有寻线和距离识别的功能-design for little smart car
MSP430_TLC5940_Pattern
- Cool Knight Rider style pattern with TLC5940NT controlled by MSP430G2553 MCU.
STM32_SIM908
- 创思通信的开发板上的源码。有GPS模块、GSM模块、涉及GPRS和GSM的编程使用，使用AT指令控制的。硬件是STM32控制SIM908。程序测试可用。-program on the board sold by Chuangsitongxin，using GPRS or SMS to send GPS info。
MWC_WinGUI_2.2
- 国外四轴飞行器的控制程序，是基于mega2560开发的。-Four aircraft of foreign control program is based mega2560 development.
BaseflightGUI2_MWC
- 国外四轴飞行器的控制程序，是基于mega2560开发的。-Four aircraft of foreign control program is based mega2560 development.
duojichengxu
- 程序功能：接收PWM控制信号，将其转换成对应的控制目标角度，A/D采样回馈得到当前摇臂的角度，最后在程序中采用PID控制输出，是摇臂到达预定目标。-Program features: PWM control signal received, which was converted to the corresponding control target angle, A/D sampling to obtain the current angle of the swing arm back. Fi
PMAC_Motor_SH_sw_code_Dec_2008
- 瑞萨SH7085芯片和SH7125芯片控制电机的程序-motor control
8051-MCU
- 基于8051单片机的系统设计，系统包含了键盘，spi协议，18B20温度传感器- a design by 8051-MCU ,it s include key, SPI protocol ,18B20 temputure sensor