资源列表
DIY-C51-2.4G-RC-Send
- DIY C51 2.4G 遥控器发送代码（nRF24L01）-DIY C51 2.4G remote control to send code (nRF24L01)
DIY-C51-2.4G-RC-Revice
- DIY C51 2.4G 遥控器接收代码（nRF24L01）-DIY C51 2.4G remote control receiver code (nRF24L01)
1_5USART
- STM32F103RCT6 操作5个串口，并且中断发送、中断接收。-STM32F103RCT6 five serial port operation, and interrupts to send, receive.
2_5USRAT_RBT6
- STM32F103RBT6 操作5个串口，都有中断接收，并对SPI1设置为DMA发送与接收。-STM32F103RBT6 five serial port operation, and has the interrupt receiving, and set the SPI1 to DMA to send and receive.
3_FM25L256_VET6
- STM32F103VET6 操作3.3V SPI接口铁电存储器 FM25L256。-STM32F103VET6 operate 3.3 V and SPI interface ferroelectric memory FM25L256 .
STC12C5A60S-
- STC12C5A60S + ht6121 + DS18B20 + p8563 + digital display time and temperature-STC12C5A60S+ ht6121+ DS18B20+ p8563+ digital display time and temperature
STM32__
- STM32实现占空比50 和10 的程序源代码-STM32PWM50 AND 10 SOURCE CODE
SPI
- STM32F103 操作SPI接口的SPI flash 范例程序，主要是镁光的SPI -STM32F103 operating SPI interface SPI flash sample program, mainly Micron SPI
STM32F103
- 基友STM32F103 的RS485驱动程序透传，包括告警输入，控制继电器输出-STM32F103-based Friends of the RS485 drivers pass through, including alarm input, relay output control
2-Key_OK
- 开发STM32单片机的入门程序,关于按键输入的问题-good souce code for learning stm32 mcrocpu
initiator
- 标签初始化,是便签作为发起者的一段程序，主要是配置一些寄存器-FOR RFid
DS12C887
- 这是一个电子钟程序，已经通过本人测试通过-this is a clock program ,it has been tested well! I am very happy that it is helpful to you!!