资源列表
F1工程模板
- stm32系列芯片多套工程模板，可以直接套用，在keil内二次简单配置(Engineering template)
频率 脉冲可控，驱动步进电机
- 使用定时器互联方式，控制步进电机，实测脉冲个数和频率都可控(Using the interconnected timer, the step motor is controlled, the number and frequency of the measured pulse are controlled.)
A7130_DRIVER(1)
- A7130 Datasheet v0.5 (Preliminary) 代码例程(A7130 Data Sheet, 2.4GHz FSK/GFSK Transceiver with 4Mbps data rate)
kaifaban_hmc704
- 使用单片机控制锁相环 hmc704,输出所需频率，(Using single chip microcomputer to control the phase-locked loop hmc704, output the required frequency,)
c8051f300_HMC833
- 使用单片机控制锁相环hmc833,输出所需频率，(Using single chip microcomputer to control the phase-locked loop hmc833, output the required frequency,)
1602+18B20+DS1302电子时钟源程序
- 1602+18B20+DS1302电子时钟源程序，以AT89C52为核心，用改进型只能温度传感器DS18B20作为温度采集器，用DS1302串行日历时钟芯片为单片机提供基准时钟，用LCD1602作为液晶显示屏来显示温度(Taking AT89C52 as the core, using the improved temperature sensor DS18B20 as the temperature collector, the DS1302 serial calendar clock chi
红外遥控测温小车
- 基于c51的遥控测温车，使用红外传输信号，并将小车周围温度实时显示在液晶上(The remote temperature measuring car based on C51 uses infrared transmission signal and displays the temperature around the car in real time on the liquid crystal.)
FM17550_READER_MCU_SPI
- IC卡读写卡程序，M50 M70卡 Type A， TypeB, TypeF A，B密钥设置，卡内信息读取写入，充值卡功能(IC card reading and writing card program, M50 M70 card Type A, TypeB, TypeF A, B key setting, card information read and write, recharge card function)
嵌入式linux下C编程例程
- 包括audio、video、fft jpeg 等等诸多例子
C语言程序2
- 步进电机正反转控制，可加速减速。。。。。。(Positive and reverse control of stepper motor)
iec9-1协议打包程序
- IEC6180-9-1协议在DSP平台上的组包开发代码。(The IEC6180-9-1 protocol develops code on the group package on the DSP platform.)
iec9-2协议打包程序
- 一个在DSP平台上开发的基于IEC61850-9-2协议程序(A IEC61850-9-2 protocol program developed on the DSP platform)