资源列表
cputimer
- DSP CPU定时器的使用 中断的使用 如何进入中断-The use of DSP CPU timer interrupt interrupted the use of how to enter
12864
- 12864显示图像的代码，可以直接下载到板子上用。-12864 shows that the code image can be directly downloaded to the board to use.
DVF
- 分频器设计,用vhdl语言进行描述，主要解决分频器-DVF
u8glib
- 8uglib 有基于arduino有关于lcd显示的库，超全-library about lcd working on arduino
C-SHARP_USB_I2C_BH1750FVI
- 在C#平台调用Ginkgo USB-I2C适配器二次编程接口函数实现对BH1750FVI光强度测量芯片进行读写控制，利用该程序和BH1750FVI模块可以实现对环境光照强度进行测量。-In C# platform invoke Ginkgo USB-I2C adapter quadratic programming interface functions to achieve BH1750FVI light intensity measurement chip to read and write
ADC
- LPC2106的裸机程序，控制ADC模块转换。-LPC2106 bare metal process, the control module ADC conversion.
AT98S52-and-DS18B20
- 使用AT89S52 和 DS18B20 做的LCD时间温度实时显示代码，有源程序和原理图 并通过protues仿真成功-Use AT89S52 DS18B20 do real-time display of the LCD time temperature code, source code and schematics and simulation by protues success
1
- Vx Works环境下双冗余以太网卡技术在底层驱动中的实现-Of Vx Works environment under the dual redundant Ethernet card technology in the realization of the underlying driver
IIC_study_class
- 这是一篇关于IIC学习的经典教程，IIC是从事硬件开发的工程师必须要掌握的知识-This is a classic tutorial on learning IIC, IIC is engaged in the hardware development of the knowledge engineer must
w5500-51-Demo-Code
- W5500网络模块的51单片机驱动程序，模拟SPI接口驱动，硬件TCPIP集成协议栈，开发很方便，调通可用。-W5500 51 Demo Code
32-buttons-1--595
- 32按键控制32个LED灯并带一个74HC595扩展。每一个按键独立控制一个LED亮灭，并且，通过了proteus 仿真。-32 buttons control the 32 leds with a 74 hc595 are needed. Each key independent control destroy an LED light, and, through the proteus simulation.
802.15.4TX
- 基于C8051F1XX单片机和CC2420射频芯片 使用802.15.4标准帧格式组包发送 使用 CC2420 的地址译码功能来接收帧-Based on C8051F1XX MCU and CC2420 RF chip using the 802.15.4 standard frame format for groups of packets using the address decoding function of CC2420 to receive frames