资源列表
clock
- 做电子时钟的思路是直接用单片机的定时计数器，原理是利用单片机芯片的定时器来产生固定时间，模拟时钟的秒，分，时，在调节电子时钟时用了外部中断，当外部中断作用时，由主程序转移到中断程序，此时我们设置了三个按钮分别控制启动调节调节分钟和小时。在设置闹钟电路里，我们设置了参数，当设置的参数和闹钟走的数值相同时，小喇叭会发出警报声音。-The idea is to make electronic clocks microcontroller timing counter directly, the pri
Desktop
- 包括好几款u盘原理图，有现代级三星两家u盘闪存的使用原理图，主控芯片有2款，还附有u盘电路一些可选用的电路，以及选用的电路变更。-Includes several schematic diagram of u disk, modern two level Samsung u disk Flash using a schematic diagram, master chip has 2 different versions, accompanied by u circuit can use cir
mini51
- 使用51单片机开发的“自动喷灌系统”的源代码，已经调试，可以运行。-MCU development of the use of 51 " automatic sprinkler system" source code, has been debugging, you can run.
diveintopython-examples-5.4
- diveintopython-examples，一些有用的，入门级的python的例子-diveintopython-examples, some useful, examples of entry-level python
UART0
- *功能: 串口发送数据 *说明: 使用外部晶振,不使用PLL,Fpclk=Fcclk/4-* Function: Serial Transmit Data * Note: Use an external crystal, do not use the PLL, Fpclk = Fcclk/4
使用片内温度传感器
- 单片机c8051f020片内温度传感器的使用，将是主流的8位单片机-C8051f020 microcontroller chip temperature sensor use, will be the mainstream of 8-bit microcontrollers
Flash
- 本程序主要是ti公司6713的evm板子的自带程序。是flash的测试程序，包括flash的写与读，希望对大家有用-This procedure is ti the company' s 6713 program, bringing the evm board. The test procedure is the flash, including flash and the time of writing, in the hope that useful
DisplayingPictureOnA128x64GLCDUsinPIC16f877
- Displaying A Picture On A 128x64 Graphical LCD Using PIC 16f8-Displaying A Picture On A 128x64 Graphical LCD Using PIC 16f877
1702SLdemo
- 刷卡板芯片FM1702SL开发板源码，C51代码，可以直接移植使用，模拟SPI接口-Card board chip FM1702SL development board source code, C51 code, can be directly transplanted to use, analog SPI interface
TV-on-DVD-mst720-113
- mst720 scheme dvd tv
lcd
- 用软件CCS3.1编程调试的一个DSP程序，主要用来驱动LCD的。-Programming and debugging software CCS3.1 a DSP program is mainly used to drive LCD' s.
hongwai
- 红外遥控测试程序，用于51单片机实验板测试程序-Infrared remote test program for 51 single-chip board test program