资源列表
NIOS-II_examples
- NIOS 例子程序 Altera的FPGA. NIOS 例子程序 Altera的FPGA. -examples for NIOS in altera
pwm-ceshi--for-stm8s
- 此文件是stm8s生成pwm的程序，仅供参考，使用的是iar-为实现pwm生成
SerialPort
- 串口工具，打开串口，发送接收数据都可以正常。支持16进制显示-serial port
ExploringCformicrocontrollers
- Microcontroller related book
my_mbLCD
- 基于XILINX SPARTAN 3E开发板编写的板上自带1602LCD的程序，程序基于MB软核开发。-Based on the XILINX SPARTAN 3E development board to write on the board with a 1602LCD procedure, procedure based on the MB core development.
gsm
- 包含丰富的gsm模块例如sim900a等指令与源码 51、430 、avr、arm-Gsm module contains a wealth of instructions and source code, such as for example sim900a 51,430, avr, arm
GEC2440_SMDK2440
- 这是基于GEC2440+WinCE5.0的BSP包，个人对其进行了修改，支持普通串口驱动程序，现在串口1和串口2都可以用了，花了自已两个多星期，呵呵。-This is based on GEC2440+ WinCE5.0 the BSP package, individual changes was carried out to support the common serial port driver, serial port 1 and port 2 now can be used, spe
stm32-usb-host-OK
- stm32作为usb主机读写U盘程序-stm32 as usb host read and write U disk program
Four-channel-radio-communication
- 四通道无线通信的代码 可以支持四个通道之间进行无线通信 -Four-channel radio communication codes can that can support wireless communication between the four channels
SD_SPEED_TEST
- wince6.0 简易的SD卡读写速度测试程序，采用VS2005的编译环境，将要拷贝的文件重命名为“SD_TEST_FILE.exe”。测序会测试拷贝文件FLASH到SD或SD到FLASH所用的时间、速度，还有文件的大小。-wince6.0 easy to read and write speed of SD card test program, using the VS2005 build environment will rename the file to copy " SD_TE
DSP_ppt
- DSP课程自学PPT，适合DSP初学者，包括DSP概述，硬件描述，软件及开发环境CCS的介绍。-DSP program self-PPT, suitable for DSP beginners, including an overview of DSP, hardware descr iption, software and development environment CCS introduction
Tools
- Terasic de3 tools download