资源列表
main
- Am2303的c语言操作程序，包括主函数，以及操作函数-The am2303 c language operating procedures, including the main function, and operating functions
demo100710
- 要点有3： 1. TMR1中断，每次中断显示led的一位，且将键盘的状态存储链推进一步。 2. TMR1中断处理中，为便利实现各位的显示，采用了寄存器4(FSR)间接寻址方式。 3. 键盘用多级状态机方式，不会为按键判断占用机时，整体显示和键盘响应非常“干脆”；用“下键”标志防止重复读键，从而对于下键和抬键的开关抖动都能够有效抑制。-Main points of 3: 1. TMR1 interrupt, each led one of the interrupt displa
verilog
- 利用verilog HDL编程驱动7段译码显示器，采用一位8进制方式，已在DE1开发板上得到验证。-Using verilog HDL programming display driver 7 of decoding, using an 8 hex mode, has been validated in DE1 Development Board.
fangbo
- 单片机实现方波的产生。频率可调，占空比可调-SCM realizing square-wave production. Frequency adjustable, occupies emptiescompared adjustable
18B20
- 18b20驱程，mega16驱动18B20实现自动测温-18b20 drive-way, mega16 drive 18B20 automatic temperature
ADC
- 采用IIC格式读取的ADC程序代码，采用C语言编写，简单易懂，适合初学者学习使用-IIC format using the ADC to read the code, using C language, easy to understand for beginners to learn to use
lcd
- 用汇编语言实现反应时间测试功能，用led作提示灯，在lcd上显示结果-a program using assembler language to test the response time.
pulse22
- 主程序-Single-chip pulse-counting procedure, computable input pulse value and error value, and serial write to read out the communication.
12864Freq
- MSP430F149自测ACLK8分频频率，12864显示 IAR5.5编译环境-MSP430F149 self ACLK8 crossover frequency, 12864 IAR5.5 build environment
robo_balance
- this cod for balancing robot for dspic micro controller.
i2c_6114
- 使用FPGA对NVP6114进行配置！绝对原创，已经成功应用到AHD高清监控机上。代码为纯VHDL编写，不是软核的。-Using FPGA to configure NVP6114! Absolutely original, has been successfully applied to the AHD high-definition monitor system. Write code for pure VHDL, not NIOS or MicroBlaze.