资源列表
CCS_helloworld
- 使用CCS编译并下载后运行，输出hello world.-use CCS compile and download operation, the output hello world.
fft_1024
- ofdm调制中用到的1024点FFT源码，ADI的TS系列DSP平台。
pulse-counting-32-bit-MCU
- 此代码是基于32位单片机的脉冲计数程序代码，能兼容常用的STM32和比赛用的飞思卡尔K60等32位单片机！-This code is based on pulse counting of 32-bit MCU program code, can be compatible with commonly used STM32 and competitions with freescale K60 32-bit MCU!
LPC2300I2C
- LPC2300 IIC驱动。LPC2200系列芯片硬件I2C软件包。使用说明 ： 主程序要配置好I2C总线接口(I2C引脚功能和I2C中断，并已使能I2C主模式)
lesson4
- 关于51,51单片机开发程序,关于51,51单片机开发程序，第四课-关于51,51单片机开发程序
include
- 可设定功率和驱动时间并在数码管上显示驱动时间倒计时的LED驱动程序-Can be set to power and drive time and in the digital tube LED display driver time in the countdown to the driver
lesson3
- 基于单片机控制数码管的程序代码设计，各个安装口得相互对应-Microcontroller based digital control design of the program code
EEPROM
- 两个版本的24c02驱动程序，能够移植到任何单片机上使用，测试通过-Two versions of the 24c02 driver ported to any microcontroller can be used, tested
experimental-infrared-transceiver
- DP_51PRO实验仪红外收发实验。使用串口发送数据经调制后从红外管输出，并通过红外接收模块把接收到的数据返回串口接收端，通过判断接收到的数据来控制LED灯点亮。-DP_51PRO experimental instrument experimental infrared transceiver. After using the serial port to send data modulated output from the infrared control and infrared rec
sixiang
- 开关磁阻电机调速系统的程序，能实现启动，制动，正反转，换相等功能-Switched reluctance motor control system
urat
- rs232的verilog的代码，code is based on verilog language, it is practical, we hope to help
MCP4725
- 基于STM32F103系列的IIC通讯，实现对DAC mcp4725配置(Based on the STM32F103 series of IIC communications, to achieve the DAC mcp4725 configuration)