资源列表
EXINT
- DSPf2407A外部中断程序，可通过设定不同的按键进入中断-DSPf2407A external interrupt program, by setting different keys to enter the break
winceKBhook
- WINCE下的键盘钩子程序，让你轻松捕获键盘消息
LIN_VCT_EY16_S_Stationary
- 基于mc908EY16的LIN从站通信例程，采用volcano提供的ey16函数库，可以实现lin2.0协议的通信。此函数库可以用于其它的ey16系统
test_5110_51
- 51 单片机的5110液晶的现实程序，有各个模块，可以直接在工程里用的。-51 of the 5110 LCD s reality program, with each module can be used directly in the project.
zhenliefangbo
- 基于STC12C5A60S2的阵列方波函数的源码，KEIL环境，如有转载，务必注明“小胖电子”-Based on the STC12C5A60S2 array square wave function source, KEIL environment, such as a transfer, be sure to indicate the "xiao pang electronic
5110
- 5110的具体程序 仅供参考 作用很好
C51-LCD1602
- C51 应用LCD1602液晶屏，带仿真原理电路图和程序-C51 Application LCD1602 LCD screen with simulation schematic diagrams and procedures
f347 uart
- f347 uart tx/rx
serial-VHDL-Deign
- 本程序模块的功能是验证实现和PC机进行基本的串口通信的功能。需要在PC机上安装一个串口调试工具来验证程序的功能。-This procedure is to verify the function module and the PC machine to achieve a basic serial communication functions. Need to install a serial PC, debugging tools to verify functionality of the
04.LED
- LED流水灯演示实验(STM32神舟III号-寄存器版)-LED water lamp demonstration experiments (STM32 Shenzhou III No.- register edition)
CH452--drivers
- 包含了CH452的驱动例程，已经调试通过。里面有两个例程，一个是51的(keil)，一个是430G2452的(CCS)-Contains the CH452 driver routines have been through debugging. There are two routines, one is 51 (the keil), one the 430G2452 of (CCS)
modbus-PCPdouble--SLAVE
- STC1C5204AD单片机modbus多机通信程序，一台PC带两台从机，其中一台晶振为11.0592M，另一台为12M，采用通信波特率为19200bps，实现了标准modbus的3和6命令，采用485通信协议，4854使能端为P3.7-STC1C5204AD microcontroller modbus multi-machine communication program, a PC with two slaves, one of the crystal is 11.0592M, anoth