资源列表
MX21_Sources
- MX21 AIPI,AITC,CRM,DMA,GPT,LCD.. driver code-MX21 AIPI,AITC,CRM,DMA,GPT,LCD..driver code
Sin_DA
- 利用keil c软件，使用c8051f120单片机，利用单片机自带的资源DA，编写的产生正弦波的程序-Using the software keil c, using c8051f120 SCM, SCM own resources by DA, the production of written procedures for sine wave
80C51_4
- 4.3典型外部数据存储器的使用；4.4用铁电存储器扩展外部数据存储器；4.5 I2C接口EEPROM——AT24C512；4.6 SPI接口EEPROM的控制；4.7FLASH存储器K9F6408U0A的控制；4.8IC_CARD-4.3 A typical use of external data memory 4.4 Ferroelectric memory expansion with external data memory 4.5 I2C Interface EEPROM- AT2
system_clock
- TQ2440的时钟初始化代码，主要是汇编的，加入一个led测试程序，便于观察时钟初始化后的效果-TQ2440 clock initialization code, mainly compiled by adding a led test program, easy to observe the effect of the clock after initialization
DE2_TV
- 一个模拟视频输入转VGA视频输出的Verilog程序，视频解码芯片采用ADV7181B，VGA DAC采用ADV7123，强力推荐-an analog video input to VGA video output Verilog procedures, Video decoder chip used ADV7181B, VGA DAC used ADV7123, strongly recommended!
ULN2003
- 芯片ULN2003的介绍资料，内容丰富。
jiegan
- pic16f877a，温度控制，控制电机正反转，电机转时间可控。c程序-pic16f877a, temperature control, reversing motor control, motor control switch time. c program
NO.26-pcf8563-control
- STC12C5204AD实验板上时钟芯片pcf8563控制程序，在开发板上试验通过-STC12C5204AD experiments on-board clock chip pcf8563 control procedures, testing by the development board
jlink-v8
- J-link驱动文件用于刷写固件可以用于损坏的Jlink上（固件丢失非硬件损坏）-J- link drive on file is used to flash the firmware can be used for the damaged Jlink (firmware loss than hardware damage)
UltrasonicDistanceLC1602Display
- 单片机制作超声波测距系统用LC1602显示距离程序-Ultrasonic Distance LC1602 Display
DSProcessing_code
- DSP, FFT, filters, speech
P320_S1_Timer_PWM
- 这是关于MSP430系列单片机的源代码，它用时钟实现PWM-MSP430