资源列表
liushuideng
- 这个是流水灯和数码管的综合实验，难度一般，适合初学者巩固相关知识-This is water lights and digital tube experiments, the difficulty, suitable for beginners to consolidate knowledge
LCD1602MPU6050
- MPU6050+LCD1602 三轴陀螺仪及三轴加速度传感器测试程序-MPU6050+LCD1602 axis gyroscope and three-axis acceleration sensor test program
wendubaojingqi
- 利用可调电阻调节电压作为模拟温度的输入量，当温度低于30℃时，扬声器发出长“嘀”报警和蓝光报警，当温度高于60℃时，发出短“嘀”报警和红光报警。测量的温度范围在0～250℃，并能实时显示当前温度值。-Use adjustable resistance adjust voltage as the input variables and simulated temperature when temperature is below 30 ℃, the speaker sends out the lo
JIJIANSU
- 单片机控制步进电机加减速，包括加减速度C程序和HEX文件，可以直接下载到单片机-Single-chip stepper motor control acceleration and deceleration, including the deceleration C program and HEX files can be downloaded directly to the microcontroller
blockram
- 本人正在学习vhdl语言，买了套开发板，这些是配套光盘里的内容，非常难得，网上找不到的-I was learning VHDL language, bought a set of development boards, which are compatible CD-ROM's content, and very rare. not online! !
zhinengxingchongdianqi
- 智能型充电器的电源和显示的设计 由于本次毕业设计是用AVR单片机来控制并要求对于LCD显示程序要用C语言来编写，所以所参考的资料主要为AVR单片机和C语言的相关书籍上。-Intelligent charger power and display the design as a result of this graduation project is a single-chip microcomputer to control the AVR and asked for the LCD dis
chuankou
- 单片机串行通信的发送实验，可以通过串口调试助手实时监测发送的数据情况。-Serial communication sent experiment, you can debug through the serial port to send real-time monitoring data assistant situation.
dsPIC30F_AD
- dsPIC30F的AD轉換設定,讀取結果-dsPIC30F the AD converter to read the result set
18B20
- 一个使用AT89S52编写的读写温度传感器18B20的程序-AT89S52 prepared to use temperature sensors to read and write procedures 18B20
GenDriver
- GenDriver AP Devices and Services for windows ce
power_Transfo3phCoreType
- power_Transfo3phCoreType,matlab仿真文件,电力电子、功率电子控制方面很有价值，调试通过-aspects of power_Transfo3phCoreType, matlab simulation files, power electronics, power electronics control valuable debugging through
EXAMPLE4.3
- PIC16887A单片机RA4接一个按键，要求每按一下按键S1，必须进入中断，在中断中让LED闪亮。即使用时钟中断来实现不带中断的按键实现中断。-PIC16887A SCM RA4 by one button, click the button for each requirement S1, must enter an interrupt, the interrupt enable LED flashes. That the use of clock interrupts to impleme