资源列表
mifaredxq
- 本程序段为mifare one 卡读写程序的子程序 也是关键程序，希望能给初学者一个参考吧
PC_I2C_BUS
- 在微机上模拟I2C总线的设计中，用并行口的D0（PIN2）模拟SCL信号，用D1（PIN3）模拟SDA信号。
Hbsio18
- 此原代码为RS232串口扩展器的主程序，也是基于单片机51系列，可将一个串口扩展为4个口子，并可控制各个口子的打开和关闭-The original code for the RS232 serial port expander for the main program, is also based on single-chip microcomputer 51, a serial port can be extended to four sources, and control all of t
Sailen
- sailen control for atmega128
ATMEGA16_simple_clock
- 这是个最基本的时钟，用T0的溢出中断，8位数码管，显示时、分、秒、10ms，没有按键，可以添加。-This is a basic clock, with T0 overflow interrupt, 8-bit digital tube, showing hours, minutes, seconds, 10ms, no buttons
DSP2833x_Spi
- 一个仪器仪表程序，可以做开发的参考程序！放心下载！2-An instrument procedure, the development of reference procedures can do! Rest assured Download! 2
c8051key
- c8051按键测试程序.按下S1-S4,在LCD上分别显示1-4 -c8051 key test program. press S1-S4, were displayed on the LCD 1-4
1602
- 1602液晶显示，用于初学者的学习和设计。-1602 LCD, for beginners to learn and design.
28335PWM
- TMS320F28335的pwm波形产生程序-TMS320F28335 the pwm waveform generator
TM12864Z1
- 12864液晶显示屏单片机驱动程序 51单片机适用-12864 single chip LCD driver for 51 MCU
johnson
- 可以用按键控制的左右移动流水灯设计，同时加入了按键边缘检测技术，防止按键抖动-You can move around with the buttons control the water lights design, while adding a key edge detection technology to prevent the keys jitter
main
- 矩阵键盘实验。数码管使用P0,键盘使用P3.0、P3.1、P3.2、P3.3。按矩阵键盘分别显示在数码管上面显示十六进制的0到F。-Matrix keyboard experiments. Digital control using P0, keyboard P3.0, P3.1, P3.2, P3.3. Matrix keyboard are displayed in hexadecimal 0 to F. In the above digital