资源列表
SoCKit_boot_from_QSPI_flash
- 在terasic(友晶)&arrow(艾睿)之SoCKit上实现了从QSPI flash启动bare-metal(裸机程序)功能，压缩包内有bare-metal完整源代码、编译说明及操作截图-Booting a bare-metal app QSPI Flash on arrow&terasic SoCKit, all the src code and screenshot file in the archive. the readme file tell the detail operati
12864C_SBN0064
- 芯片为sbn0064,液晶型号为12864C的一个演示参考程序。（我已经测试过，可以使用）-Chip for sbn0064, LCD model for 12864 c a demo reference program. (I have already tested, you can use)
STM32PUCOSPUCGUIPMP3PTFPFAT
- 基于STM32的UCOS+UCGUI+TF的MP3 播放器 工程代码-STM32+UCOS+UCGUI+TF+FAT+MP3 MP3 PLAYER
61EDA_C2701
- 开发环境vhdl FPGA实现的NandFlash控制器（带ECC）文档+源代码-Vhdl FPGA development environment to achieve NandFlash controller (with ECC) document+ source code
08617885c51design
- 基于proteus ，产生正弦波，方波，三角波。-based on Proteus, generate sine wave, square wave, triangle wave.
mc9s12t64
- 飞思卡尔监控程序，官方源程序，但是缺少MC9S12T64.DAT-MC9S12T64.DAT/SERIAL MONITOR/BOOTLOADER/LRAE
arduino_WifiRobot
- 基于arduino的wifirobot机器人的单片机程序，目标硬件是atmega328的arduino uno开发板，需要适用wifi通讯模块，或者适用刷如openwrt的wr703n路由器接入到arduino uno的串口来完成无线通讯。采用手机，笔记本电脑来作为上位机
arduino_MQ-5-1602
- 基于arduino的只能家用瓦斯煤气检测装置，只控制芯片是atmega328或者类似芯片，其中arduino uno，nano等适用，此源码可用arduino IDE打开，编译出目标程序-Only household methane gas detection device based on Arduino, only control chip is atmega328 or similar chips, the Arduino uno, nano, etc. applicable, open
xunjiandlanya
- stc89c51单片机的程序，适合四路循迹和蓝牙通信，当检测不到黑线时，小车停下，进入蓝牙通信状态，等待蓝牙指令。-stc89c51 SCM program for four tracking and Bluetooth communication, when the black line is not detected, the car stopped, enter the Bluetooth communication status, wait a Bluetooth command.
jk
- 这是基于RS485温度采集系统毕业设计的上位机程序，界面是使用VB 做的。可以显示下位机上传的温度湿度数据和时间。-this is a rs485 vb open source code.
FPGA
- 包括密勒码编解码、循环码编解码、FSK和PSK调制解调-Including Miller encoding and decoding, encoding and decoding cycle, FSK and PSK modulation and demodulation
JLX12864_STM32
- JLX12864液晶显示程序基于STM32单片机SPI通信协议，省去复杂引脚经过测试-JLX12864 LCD program based on the STM32 microcontroller SPI communication protocol, eliminating the complex pin