资源列表
doubleserial
- 本代码是先了stc15系列的双串口，使用者能够通过这段代码实现串口透传。-This code is the first stc15 series double serial interface, the user can realize serial port through this code passthrough.
edma_test
- DSP EDMA测试程序,测试了一下AB模式的DMA传输，结果是正确的-DSP EDMA test procedure
RISC_SPM
- 可以完成简单指令集的八位ALU,指令集包括 NOP ADD AND NOT SUB RD WR BR BRZ-it s an 8 bit risc alu.
second
- 利用Verilog HDL语言进行数字系统设计实现秒表的设计，涵盖原理图设计、文本设计以及进行波形仿真，并有对应的报告。报告中还包括BCD/7段译码集成电路74LS47仿真实验、单管分压式稳定工作点偏置电路仿真实验和8路智力竞赛抢答器电路设计-Use Verilog HDL language design and implementation of digital systems design stopwatch, covering schematic design, text, design,
Camera_DebugCode
- stm32f103c8驱动camera模块，读取帧传回stm32并显示在LED液晶上，每秒8次-Stm32f103c8 drive camera module, reading the frame back to STM32 and displayed on the LCD LED, 8 times per second
1
- 输入一行字符，去除重复的字符，然后进行冲排列，输出所有可能-Enter a line of characters, remove duplicate characters, and then punch arrangement, the output of all possible
avr_led_seg
- 1.动态扫描方式显示数码管的数值 2.动态扫描方式卷动显示数码管的数值-1. Dynamic scanning digital tube display values 2. Dynamic scanning scrolling digital display values of
SPI1_DebugCode
- stm32f103c8通过spi1口读取flash模块中的数据显示在led上面-The stm32f103c8 flash module to read data is displayed in the LED above through the SPI1 port
avr_ds1302
- 1.设置DS1302时间和日历 2.读取DS1302时间和日历-1. Set the time and calendar DS1302 DS1302 2. Reading Time and Calendar
avr_encoder
- 1.将连接编码器的I/O口初始化成带上拉的输入 2.开启单片机的外部中断0，并配置成任意的逻辑电平变化都将引发中断 3.提供读取编码器计数值的API 4.提供读取编码器旋转方向的API-1. Connect the encoder I/O port is initialized to inputs with pull 2. Turn on the external microcontroller interrupt 0, and configured to any logic lev
GPS_DebugCode
- STM32F103C8通过串口1接收来自NEO-6Q GPS模块的信息并通过串口2连接电脑显示在超级终端，波特率为115200.-STM32F103C8 through the serial port to receive the NEO-6Q 1 GPS module through the serial port information and 2 connecting the computer display in the super terminal, the baud rate is
avr_adc
- 1.初始化Atmega16单片机ADC 2.使用ADC噪声模式采外部电压 3.为配置ADC参数向外提供简单易用的API-1. Initialize Atmega16 microcontroller ADC 2. Use the ADC noise pattern mining external voltage 3. Configure ADC parameter provides a simple-to-use API outward