资源列表
mux4_with_en
- 带有使能端的4输入数据选择器，S0, S1, S2, C0, C1为输入，C1，C2为使能输入，P, Q, R, T为输出，c1c2=00时输出全为0，c1c2=01时输出全为1，c1c2=10时数据选择，c1c2=11时输出是c1c2=10时的反。-4 with Enable input data selector, S0, S1, S2, C0, C1 as input, C1, C2 an enable input, P, Q, R, T as an output, c1c2 = 00 a
enhanced_seven_seg
- 具有使能端的7段译码器，低电平有效，使能为高时有效，实现二进制代码到7段译码器的编码，使能为低时输出全部为1.-Enable end with 7-segment decoder, active low, Enable is active high and achieve binary code to seven segment decoder encoding output enable is low as a whole.
encoder104
- 独热码到二进制代码的转换即10输入4输出的二进制编码器的verilog程序。-One-hot code to binary code conversion, or 10 inputs 4 outputs the binary encoder verilog program.
barrel_shifter
- 自己写的环形移位寄存器的verilog程序，功能是由输入控制左移的位数，实现循环左移。-Write your own ring shift register verilog procedures, functions are controlled by the input number of digits left to achieve the left circle.
seven_persons
- 自己写的7人表决器的verilog程序，实现4人以上通过则通过的功能。-Seven people to write their own voting machine verilog program to achieve four or more people pass through function.
adc0804
- ADC0804 8位进度ADC采集程序 用数码管显示 -ADC0804 Collection procedures
abcd
- 基于eeprom的温度报警系统，可设定上下限温度-Based eeprom temperature alarm system, upper and lower temperature can be set
avr-bootloader
- 一个最全通用型的AVR bootloader 使用仅仅只需要对应的型号更改相应的配置，十分好用，支持485。并带有烧写软件-One of the most common type of AVR bootloader full use of the model corresponds only need to change the corresponding configuration is very easy to use, supports 485. And with the programm
wifi_RM04
- wifi 模 块 RM04 资 料.rar-wifi module RM04 information. rar
LCD1602
- 这是一份很完整的单片机万年历程序和资料，是1602上的有分时-This is a very complete single-chip program and data calendar
frequence1
- 基于FPGA的等精度数字频率计，包含FPGA和单片机通信程序，解释非常详细。经过调试成功。-FPGA-based Precision Digital frequency meter, including FPGA and MCU communication program, explained in great detail. After successful commissioning.
g2553data
- 初期学习g2553时的一些资料，修正了官方程序的一些错误，液晶屏显示浮点数的处理代码-When the initial learning g2553 some information corrected some errors in the official program, the LCD screen displays floating point processing code