CDN加速镜像 | 设为首页 | 加入收藏夹
当前位置: 首页 源码下载 嵌入式/单片机编程

资源列表

« 1 2 ... .69 .70 .71 .72 .73 9574.75 .76 .77 .78 .79 ... 33646 »
  1. ise

    0下载:
  2. 设计微处理器命令处理系统,通过系统的串口输入指令显示闹铃状态。-Design a microprocessor command processing system through the system s serial input command to display the alarm status.
  3. 所属分类:VHDL-FPGA-Verilog

    • 发布日期:2017-11-26
    • 文件大小:1.5mb
    • 提供者:王先生
  1. 128x64-to-ISD4004PAT89C

    0下载:
  2. 基于AT89C系列陪配合ISD4004制作的12864时钟-Based on AT89C Series accompany with the the ISD4004 production of 12864 clock
  3. 所属分类:SCM

    • 发布日期:2017-11-26
    • 文件大小:4.07mb
    • 提供者:pingping
  1. ise

    0下载:
  2. 设计微处理器命令处理系统,实现的功能:通过系统的串口输入指令TIME控制时钟显示时间。-Design microprocessor command processing system, functions: control the clock display time through the system s serial input command TIME.
  3. 所属分类:VHDL-FPGA-Verilog

    • 发布日期:2017-12-01
    • 文件大小:980.36kb
    • 提供者:王先生
  1. ise

    0下载:
  2. 实现两个2位二进制数的相加,两个数A和B分别对应于板子上的(SW3,SW2)和(SW1,SW0),其中SW3,SW1为高位。BTN 设计微处理器基本输入输出系统,North (V4) 按键为运算执行键。当BTN North按下时,两数相加的结果将通过LD3~LD0显示,其中LD3为最高位,LD0为最低位。同时,超级终端上也会输出计算结果。-Design microprocessor basic input output system, the sum of two 2-bit binary nu
  3. 所属分类:VHDL-FPGA-Verilog

    • 发布日期:2017-11-26
    • 文件大小:945.35kb
    • 提供者:王先生
  1. ise

    0下载:
  2. 设计微处理器基本输入输出系统,实现投票系统,通过拨码开关(SW0~SW3)输入,当BTN North (V4)键被按下时收集投票。若投票数大于或等于3票,则点亮板上的LD0,并在超级终端输出“Pass!”。若投票数小于3票,则不点亮LD0,并在超级终端输出“Lose!”-Design microprocessor basic input output system, voting system, input via DIP switch (SW0 to SW3) to collect the b
  3. 所属分类:VHDL-FPGA-Verilog

    • 发布日期:2017-11-11
    • 文件大小:961.82kb
    • 提供者:王先生
  1. ise

    0下载:
  2. 设计微处理器基本输入输出系统,通过拨码开关控制LED灯的亮灭(开关为高电平时灯亮,反之则灯灭),并从键盘输入的字符可以在超级终端回显-Design microprocessor basic input output system, is controlled by DIP switch LED turns on or off (switch is high, the lights, the lamp is off and vice versa), and characters can be en
  3. 所属分类:VHDL-FPGA-Verilog

    • 发布日期:2017-11-23
    • 文件大小:1.38mb
    • 提供者:王先生
  1. 6-homework

    0下载:
  2. T1定时器定时,工作方式一,定时周期2秒,高低电平占空比1:1-failed to translate
  3. 所属分类:SCM

    • 发布日期:2017-12-10
    • 文件大小:16.23kb
    • 提供者:tuber
  1. 3AxisCutCompensate

    0下载:
  2. 三坐标球刀补偿算法,已得到充分测试,用于生产产品-Three-axis radius cutter compensation algorithm, has been fully validated
  3. 所属分类:uCOS

    • 发布日期:2017-12-10
    • 文件大小:18.67kb
    • 提供者:郭久旭
  1. Timing-Forward-Reverse

    0下载:
  2. 十秒钟步进电机轮流反转并显示在数码管上,单双八拍工作方式:A-AB-B-BC-C-CD-D-DA (即一个脉冲,转 3.75 度)-10 seconds of stepping motor rotation reversed and displayed on the digital control, single and double eight work: A-AB-B-BC-C-CD-D-DA (ie a pulse, turn 3.75 degrees)
  3. 所属分类:SCM

    • 发布日期:2017-11-21
    • 文件大小:1.15kb
    • 提供者:shao
  1. uartfifo

    0下载:
  2. 基于FIFO的串口发送机设计。主要实现一个串口发送器功能,该发送器的数据是从FIFO 中读取的。也就是说,只要FIFO 中有数据,串口发送器就会启动,将数据发送出-FIFO-based serial transmitter design. A serial transmitter function of the transmitter data is read from the FIFO. In other words, as long as there is data in the FIFO,
  3. 所属分类:VHDL-FPGA-Verilog

    • 发布日期:2017-12-01
    • 文件大小:500.26kb
    • 提供者:*斐
  1. AT91SAM7x256-usb-mass-storage

    0下载:
  2. Atmel的AT91SAM7x256芯片的usb存储的源程序-Of Atmel s AT91SAM7x256 chip USB storage source
  3. 所属分类:Embeded-SCM Develop

    • 发布日期:2017-11-09
    • 文件大小:681.33kb
    • 提供者:于晓洋
  1. DS1302-01

    0下载:
  2. DS 1302 时钟 可以设定时间 DS 1302 时钟 可以设定时间-failed to translate failed to translate failed to translate failed to translate failed to translate
  3. 所属分类:SCM

    • 发布日期:2017-12-05
    • 文件大小:3.48kb
    • 提供者:zhouqinyi
« 1 2 ... .69 .70 .71 .72 .73 9574.75 .76 .77 .78 .79 ... 33646 »
搜珍网 www.dssz.com

浏览历史记录

关闭