资源列表
drv_app
- K9F1208 在STR710处理器上的驱动源代码
INTSPC3
- 现场总线是国际上具有较大影响的总线标准之一! 它是德国国家标准和欧洲标准 所规定的现场总线标准"-Fieldbus is the international community have a greater impact of the bus, one of the criteria! It is the German national and European standards under the fieldbus standard "
i2c_keil_lpc2144
- i2c management for master and slave (interrupt procedure) for lpc2144 in keil compiler
TC35
- 51单片机控制GSM模块 很有用的c程序，希望队大家有所帮助-51 SCM control GSM module C very useful procedure, hope that the team help
Test_OV9650
- 基于ARM9的s3c2440裸机的ov9605型CMOS摄像头测试程序-ARM9-based bare metal of the ov9605 s3c2440 CMOS camera-based test program
four_led
- AT89C2051控制4个灯,可与上位机通讯,波特率可以修改
spi_master
- ARM-CORTEX M3控制器的SSI例程，实现从SSI接收并发送数据。-ARM-CORTEX M3 controller SSI routines to achieve from the SSI receive and send data.
PID
- 该程序描述了用单片机实现离散的PID控制器，通过改变kp,ki,kp参数可以实现控制器的调节。-The program describes the use of single-chip realization of a discrete PID controller, by changing the kp, ki, kp controller parameter adjustment can be achieved.
Source-Files
- 新唐cortex-m0例程 初步认识新唐是如何工作的-The Nuvoton cortex-m0 routine initial understanding of the new Tang How does it work
STM32F103_I2C_RW_AT24C04
- STM32F103通过硬件读写AT24Cxx，不过要注意连续写的字节的个数，AT24C02和AT24C04好像只能连续写8个字节的数据，在做具体应用时看一下元器件手册，在小小的修改一下程序就搞定了-STM32F103 AT24Cxx hardware read and write, but to pay attention to the number of consecutive bytes written, AT24C02 and AT24C04 seems only continuous w
Ymodem协议 STM32实现
- 通过PC端的超级终端，使用YMODEM协议，下发文件。 接收端为STM32，使用串口接收，串口协议为YMODEM。 此方法可以用于配置文件下发，或者升级包的下方。
t2
- 将两个五位十进制数相加，加数与被加数以ascii码形式存放在data1、data2中，利用dos9号调用功能完成显示-Two five decimal addition, addend summand ascii code form stored in data1, data2 dos9 number call function to complete the display