资源列表
s3c2416
- S3C2416裸机初始化代码，包含各种硬件的初始化。-S3C2416 bare initialization code, initialization includes various hardware.
12864
- 利用dac0832实现数模转换，在液晶12864上显示正弦波。-Use dac0832 achieve digital to analog conversion, displayed on the LCD 12864 sine wave.
Hal_BT
- STM32 用 UART 串口 通过 DMA 方式进行 蓝牙 传输-C语言，自己的项目，完全可用-STM32 UART DMA Bluetooth transfer
samsung_new_ecc_for_512byte_256word.tar
- sansung 512byte ecc 算法源码-sansung 512byte ecc algorithm source
SPI
- 该spi通信方式是基于stm32开发板进行编写的，用在芯片scr2100的上面，实现芯片之间的通信方式。-The spi communication is carried out based on written stm32 development board, the chip used in the above scr2100 achieve communication between the chips.
Timer
- LCD12864驱动程序，里面有一个时钟程序。-LCD12864 driver, there is a clock program.
main
- ARM7，9225低8位，带触摸，适合模组使用-ARM7, 9225 8-bit low, with a touch, for modules to use
wm8731
- wm8731 driver source file for freescale kinetis mcu.
GPIO做的I2C驱动
- 用IO口做的I2C驱动，非常方便移植
1602LCD-V
- LCD1602显示 */ /* 参考电压接至5V电源 */ /* 最小输出电压：0.00V 最大输出电压：5.00V 分辨率：0.02V-LCD1602 display*//* access to the 5V reference voltage power supply*//* the minimum output voltage: 0.00V maximum output voltage: 5.00V resolution: 0.02V
1-Wire-Bus
- This is a 1 wire bus driver, it can comunicate with de device DS24-This is a 1 wire bus driver, it can comunicate with de device DS2411