资源列表
EXTI_Configuration(void)
- STM32F103C8T6自编简单中断程序，以及中断优先级，每行代码都有中文注释，十分好理解-void EXTI_Configuration(void) { EXTI_InitTypeDef EXTI_InitStructure EXTI_ClearITPendingBit(EXTI_Line8) GPIO_EXTILineConfig(GPIO_PortSourceGPIOB, GPIO_PinSource8) EXTI_InitStructure
OLED_I2C
- SSD1306 128*64 0.96 OLED I2C dirver- void I2C_Int(void) { GPIO_InitTypeDef GPIO_InitStructure //éùÃ ÷ò» ¸ ö GPIO_InitStructure½ á11ìå GPIO_InitStructure.GPIO_Pin I2C_SCL|I2C_SDA //Ñ ¡ Ô ñ ò
MSP-EXP430F5529-LAB-CODE
- 微处理器msp430f5529上课的七个实验，zhuyao流水灯，按键控制led,液晶屏显示姓名和运动小球。-Seven experimental microprocessor msp430f5529 class, mainly water lights, button control led, the LCD screen displays the name and moving small balls.
STM32F407uart1_uart5
- STM32F407 串口1到串口5的初始化和接收发送程序-STM32F407 USART1 TO USART5 receive and send
STM32F407_SD2401_IIC
- 通过模拟IIC的方式，读写时钟SD2401-read and write SD2401
STM32F407_IIC_AT24C1024
- STM32F407 IIC模拟驱动时钟SD2401-read and write SD2401
IOaUART
- 利用单片机IO口模拟UART程序,系统用了一个定时器和一个外部中断,外部中断主要是用来检测串口起始位的到来。-IO mouth simulation UART program, microcontroller system with a timer and an external interrupt, external interrupt is mainly used to detect the arrival of the start bit serial port.
STM8S103systemCode--IAR
- STM8S103F3 STM8S103F3资料 最小系统板试验程序 IAR 环境-STM8S103F3 STM8S103F3 document IAR ide
en.stm32f4_dsp_stdperiph_lib-2
- en.stm32f4_d stdperiph_lib stm32f4 标准dsp 库，可以参考-en stm32f4 dsp stdperiph lib
CR95HF-Demo-board-project-v2.1.2
- CR95HF驱动程序,带ISO14443A和15693协议的程序-CR95HF Demo
AD7688_test
- 全差分16位ADC——AD7688与MSP430通信程序，已调通！具有低功耗、抗干扰能力强的特点。-Fully-differential 16 bit ADC- AD7688 with MSP430 communication program, modulated through! Has the characteristics of low power consumption, strong anti-jamming capability.
lpc177x_8x_uCOSII
- CortexM3 例程 主要为ucosII代码，基于LPC系列单片机-Cortex examples