资源列表
Mutual-fianlly-sucefully
- 基于STM32下两个节点之间的通信，两个节点之间进行数据传输-Based on the STM32 communication between two nodes, transmission of data between two nodes
usbtin.2016-04-13.tar
- USBtin - Simple USB to CAN interface This archive contains firmware, drivers and bootloader for the USBtin project. USBtin is a simple USB to CAN interface. You find further information about USBtin on the project homepage: http://www.fi
can2usb
- STM32 CAN to USB example KEIL src S TM32 CAN to USB example KEIL src STM32 CAN to USB example KEIL src -STM32 CAN to USB example KEIL src STM32 CAN to USB example KEIL src STM32 CAN to USB example KEIL src STM32 CAN to USB example KEIL sr
main
- 基于PIC16f887a单片机的串口USART驱动源代码-Based on the PIC16f887a microcontroller serial USART driver source code
SSD1963_Driver
- SSD1963 STM32 driver code
RTC-1.1
- STM32——rtc实时时钟源码，并实现了闹钟功能。-stm32 rtc
OV7670-software-application-note
- OV7670软件应用要点，英文原版的，欢迎大家下载-OV7670 Software Application Note
PCB1
- CY7C68013的基础设计原理图，可以直接使用，使用Altium设计-The basic design principle of CY7C68013 figure, can be used directly, using the Altium design
sun
- 通过学习电视机红外控制信号，实现远程控制控制功能-Through the study of TV infrared control signal, remote control and control functions
23th_lcd
- 6410开发板相配套的lcd显示屏的驱动源码，可以直接移植，用来学习lcd驱动很有帮助。-6410 development board supporting the lcd display driver source code, can be directly transplanted, used to learn lcd drive very helpful.
14th_ddr
- 6410开发板对应的ddr驱动源码，基于裸板开发，对于学习驱动开发是很好的参考示例-6410 development board corresponding to the ddr-driven source, based on the bare board development, learning-driven development is a good reference example
jishuqi
- 这是Verilog写的，一个计数器的程序代码，以及测试文档-This is written by Verilog, a program code for the counter, and a test document