资源列表
tslib-0.1.1
- tslib触摸屏校准源代码，校准触摸屏以获得正确的坐标值-tslib touch screen calibration source code, touch screen calibration in order to obtain the correct coordinate values
U-BOOT_start
- 基于ARM9——S3C2410为核心的最小系统，启动代码U_BOOT，经本人开自己的开发板上实验，可以跑通，需要的可根据自己的实际情况，改写！-Based on ARM9- S3C2410 core minimum system, start the code U_BOOT, after I opened their own development board experiment, you can run pass, need to be according to their actual s
bookSearch.tar
- 一个嵌入式的实例，个人感觉非常好的，希望有用 -An embedded instance, individuals feel very good, hope that useful
linux_device_ioctl
- linux_device_ioctl ioctl是设备驱动程序中对设备的IO通道进行管理的的函数，程序可以通过ioctl想设备发送命令、参数等配置信息-linux_device_ioctl ioctl is device driver for device IO channel management functions, the program can send commands via ioctl to the device, parameters and other configurat
2440_core
- mini2440开发板pcb，嵌入式ARM9原理图pcb-mini2440 development board pcb
1602and12232
- 1602和12232使用源码和相关资料，绝对宝贵资料。嵌入式开发必备。-1602 and 12232 use the source code and related information, the absolute valuable information. Essential embedded development.
netswitch
- 在有名的开源elphel 333 系列网络摄像机基础上，本人设计了RS485到ETRAX 100 LX的串口的转换板，用于控制云台，此代码为完整的，包含客户端的控制用的FLASH，以及服务端的服务程序源代码。-revenue in the famous series elphel 333 network camera based on I designed a RS485 ETRAX 100 LX to the serial conversion boards, for the control
qowowsakcsalkdf
- pudn pudn pudn pudn -pudn pudn pudn pudn pudn pudn pudnpudn
Linux-copy
- 自己总结了三种Linux机器间文件目录拷贝的操作方法。-Three Linux file directory copy operation between the machine
register_chrdev
- register_chrdev 注册字符设备实例，提示加载模块后，需mknod建立相应的文件节点，在执行test测试程序-register_chrdev register character device example, prompts to load the module, the need to establish the appropriate file mknod node in the test program test execution
nandflash_demo
- 该实验程序完成了land flash的读写测试，包括串口打印输出功能，适用于fl2440，ok2440上的k9f**（2K） nand falsh读写实验代码-The experimental procedure is completed the land flash read and write tests, including serial print output for fl2440, ok2440 on k9f** (2K) nand falsh experimental code r
BEEP
- 一个arm7开发板上的beep蜂鸣器实验程序，此程序用c语言编写。-a arm7 development board buzzer beep experimental procedure, this procedure using c language.